InfiniTime/doc/SWD.md

16 lines
894 B
Markdown
Raw Permalink Normal View History

# How to flash InfiniTime using the SWD interface
Download the files **bootloader.bin**, **image-x.y.z.bin** and **pinetime-graphics-x.y.z.bin** from the release page:
2022-05-30 01:42:45 +00:00
![Image file](gettingStarted/imageFile.png)
The bootloader reads a boot logo from the external SPI flash memory. The first step consists of flashing a tool in the MCU that will flash the boot logo into this SPI flash memory. This first step is optional but recommended (the bootloader will display garbage on screen for a few second if you don't do it).
Using your SWD tool, flash **pinetime-graphics-x.y.z.bin** at offset **0x0000**. Reset the MCU and wait for a few seconds until the logo is completely drawn on the display.
2021-12-05 20:04:35 +00:00
Then, using your SWD tool, flash these file at the following offsets:
- bootloader.bin : **0x0000**
- image-x.y.z.bin : **0x8000**
Reset and voilà, you're running InfiniTime on your PineTime!