InfiniTime/doc/SWD.md

# How to flash InfiniTime using the SWD interface

Download the files **bootloader.bin**, **image-x.y.z.bin** and **pinetime-graphics-x.y.z.bin** from the release page:

![Image file](gettingStarted/imageFile.png)

The bootloader reads a boot logo from the external SPI flash memory. The first step consists of flashing a tool in the MCU that will flash the boot logo into this SPI flash memory. This first step is optional but recommended (the bootloader will display garbage on screen for a few second if you don't do it).
Using your SWD tool, flash **pinetime-graphics-x.y.z.bin** at offset **0x0000**. Reset the MCU and wait for a few seconds until the logo is completely drawn on the display.

Then, using your SWD tool, flash these file at the following offsets:

- bootloader.bin : **0x0000**
- image-x.y.z.bin : **0x8000**

Reset and voilà, you're running InfiniTime on your PineTime!
Documentation cleanup and reorganization 2021-11-06 12:38:11 +00:00			`# How to flash InfiniTime using the SWD interface`
Fix markdown format with autoformatter (#1284) 2022-08-21 11:50:09 +00:00
Documentation cleanup and reorganization 2021-11-06 12:38:11 +00:00			`Download the files bootloader.bin, image-x.y.z.bin and pinetime-graphics-x.y.z.bin from the release page:`

doc: Fix imageFile.png path in SWD.md 2022-05-30 01:42:45 +00:00			`![Image file](gettingStarted/imageFile.png)`
Documentation cleanup and reorganization 2021-11-06 12:38:11 +00:00
			`The bootloader reads a boot logo from the external SPI flash memory. The first step consists of flashing a tool in the MCU that will flash the boot logo into this SPI flash memory. This first step is optional but recommended (the bootloader will display garbage on screen for a few second if you don't do it).`
Improved documentation readability Improved documentation readability by rephrasing confusing sentences. Added Sitronix ST7789V datasheet link to SPI-LCD-driver.md for easier reference. 2021-12-02 20:50:59 +00:00			`Using your SWD tool, flash pinetime-graphics-x.y.z.bin at offset 0x0000. Reset the MCU and wait for a few seconds until the logo is completely drawn on the display.`
Documentation cleanup and reorganization 2021-11-06 12:38:11 +00:00
Revised documentation 2021-12-05 20:04:35 +00:00			`Then, using your SWD tool, flash these file at the following offsets:`
Documentation cleanup and reorganization 2021-11-06 12:38:11 +00:00
Fix markdown format with autoformatter (#1284) 2022-08-21 11:50:09 +00:00			`- bootloader.bin : 0x0000`
			`- image-x.y.z.bin : 0x8000`
Documentation cleanup and reorganization 2021-11-06 12:38:11 +00:00
			`Reset and voilà, you're running InfiniTime on your PineTime!`