Fixed typo (Transfert -> Transfer)

This commit is contained in:
Ryan Hartlage 2020-11-01 15:22:21 -05:00
parent 0e97db1c30
commit 3ccfa1d924
4 changed files with 19 additions and 23 deletions

View File

@ -39,7 +39,7 @@ This chapter describes degraded cases that are handled by our bootloader and tho
Case | Current bootloader | Solution
-----|--------------------|----------------------------------------------
Data got corrupted during file transfert | [OK] Application firmware does a CRC check before applying the update, and does not proceed if it fails. | N/A
Data got corrupted during file transfer | [OK] Application firmware does a CRC check before applying the update, and does not proceed if it fails. | N/A
New firmware does not run at all (bad file) (1) | [NOK] MCU executes unknown instructions and will most likely end up in an infinite loop or freeze in an error handler. The bootloader does not run, it can do nothing, the MCU is stucked until next reset | [OK] The bootloader starts the watchdog just before running the new firmware. This way, the watchdog will reset the MCU after ~7s because the firmware does not refresh it. Bootloader reverts to the previous version of the firmware during the reset.
New firmware runs, does not set the valid bit and does not refresh the watchdog | [NOK] The new firmware runs until the next reset. The bootloader will be able to revert to the previous firmware only during the next reset. If the new firmware does not run properly and does not reset, the bootloader can do nothing until the next reset | [OK] The bootloader starts the watchdog just before running the new firmware. This way, the watchdog will reset the MCU after ~7s because the firmware does not refresh it. Bootloader reverts to the previous version of the firmware during the reset.
New firmware does not run properly, does not set the valid bit but refreshes the watchdog | [NOK] The bootloader will be able to revert to the previous firmware only during the next reset. If the new firmware does not run properly and does not reset, the bootloader can do nothing until the next reset | [~] Wait for the battery to drain. The CPU will reset the next time the device is charged and will be able to rollback to the previous version.

View File

@ -23,7 +23,7 @@ void Gfx::ClearScreen() {
lcd.BeginDrawBuffer(0, 0, width, height);
lcd.NextDrawBuffer(reinterpret_cast<const uint8_t *>(buffer), width * 2);
WaitTransfertFinished();
WaitTransferFinished();
}
@ -40,7 +40,7 @@ void Gfx::FillRectangle(uint8_t x, uint8_t y, uint8_t w, uint8_t h, uint16_t col
lcd.BeginDrawBuffer(x, y, w, h);
lcd.NextDrawBuffer(reinterpret_cast<const uint8_t *>(buffer), width * 2);
WaitTransfertFinished();
WaitTransferFinished();
}
void Gfx::FillRectangle(uint8_t x, uint8_t y, uint8_t w, uint8_t h, uint8_t* b) {
@ -54,7 +54,7 @@ void Gfx::FillRectangle(uint8_t x, uint8_t y, uint8_t w, uint8_t h, uint8_t* b)
lcd.BeginDrawBuffer(x, y, w, h);
lcd.NextDrawBuffer(reinterpret_cast<const uint8_t *>(b), width * 2);
WaitTransfertFinished();
WaitTransferFinished();
}
void Gfx::DrawString(uint8_t x, uint8_t y, uint16_t color, const char *text, const FONT_INFO *p_font, bool wrap) {
@ -125,7 +125,7 @@ void Gfx::DrawChar(const FONT_INFO *font, uint8_t c, uint8_t *x, uint8_t y, uint
lcd.BeginDrawBuffer(*x, y, bytes_in_line*8, font->height);
lcd.NextDrawBuffer(reinterpret_cast<const uint8_t *>(&buffer), bytes_in_line*8*2);
WaitTransfertFinished();
WaitTransferFinished();
*x += font->charInfo[char_idx].widthBits + font->spacePixels;
}
@ -153,7 +153,7 @@ bool Gfx::GetNextBuffer(uint8_t **data, size_t &size) {
state.remainingIterations--;
if (state.remainingIterations == 0) {
state.busy = false;
NotifyEndOfTransfert(state.taskToNotify);
NotifyEndOfTransfer(state.taskToNotify);
return false;
}
@ -185,7 +185,7 @@ bool Gfx::GetNextBuffer(uint8_t **data, size_t &size) {
return true;
}
void Gfx::NotifyEndOfTransfert(TaskHandle_t task) {
void Gfx::NotifyEndOfTransfer(TaskHandle_t task) {
if(task != nullptr) {
BaseType_t xHigherPriorityTaskWoken = pdFALSE;
vTaskNotifyGiveFromISR(task, &xHigherPriorityTaskWoken);
@ -193,7 +193,7 @@ void Gfx::NotifyEndOfTransfert(TaskHandle_t task) {
}
}
void Gfx::WaitTransfertFinished() const {
void Gfx::WaitTransferFinished() const {
ulTaskNotifyTake(pdTRUE, 500);
}
@ -204,4 +204,3 @@ void Gfx::SetScrollArea(uint16_t topFixedLines, uint16_t scrollLines, uint16_t b
void Gfx::SetScrollStartLine(uint16_t line) {
lcd.VerticalScrollStartAddress(line);
}

View File

@ -53,8 +53,8 @@ namespace Pinetime {
Drivers::St7789& lcd;
void SetBackgroundColor(uint16_t color);
void WaitTransfertFinished() const;
void NotifyEndOfTransfert(TaskHandle_t task);
void WaitTransferFinished() const;
void NotifyEndOfTransfer(TaskHandle_t task);
};
}
}

View File

@ -76,8 +76,8 @@ void LittleVgl::SetFullRefresh(FullRefreshDirections direction) {
void LittleVgl::FlushDisplay(const lv_area_t *area, lv_color_t *color_p) {
ulTaskNotifyTake(pdTRUE, 500);
// NOtification is still needed (even if there is a mutex on SPI) because of the DataCommand pin
// which cannot be set/clear during a transfert.
// Notification is still needed (even if there is a mutex on SPI) because of the DataCommand pin
// which cannot be set/clear during a transfer.
// TODO refactore and remove duplicated code
@ -831,6 +831,3 @@ void LittleVgl::InitThemeWindow() {
// theme.style.win.btn.rel = &lv_style_transp;
// theme.style.win.btn.pr = &win_btn_pr;
}