Remove CMake targets and corresponding CLI arguments that are specific to the debugging environment (USE_JLINK, USE_OPENOCD and USE_GDB_CLIENT).

This commit is contained in:
Jean-François Milants 2022-09-17 21:17:01 +02:00 committed by JF
parent c853681d75
commit 6ed8e983e9
6 changed files with 2 additions and 189 deletions

View File

@ -60,7 +60,6 @@ CmakeGenerate() {
cmake -G "Unix Makefiles" \ cmake -G "Unix Makefiles" \
-DCMAKE_BUILD_TYPE=$BUILD_TYPE \ -DCMAKE_BUILD_TYPE=$BUILD_TYPE \
-DUSE_OPENOCD=1 \
-DARM_NONE_EABI_TOOLCHAIN_PATH="$TOOLS_DIR/$GCC_ARM_VER" \ -DARM_NONE_EABI_TOOLCHAIN_PATH="$TOOLS_DIR/$GCC_ARM_VER" \
-DNRF5_SDK_PATH="$TOOLS_DIR/$NRF_SDK_VER" \ -DNRF5_SDK_PATH="$TOOLS_DIR/$NRF_SDK_VER" \
"$SOURCES_DIR" "$SOURCES_DIR"

View File

@ -24,28 +24,6 @@ if (NOT NRF5_SDK_PATH)
message(FATAL_ERROR "The path to the NRF52 SDK must be specified on the command line (add -DNRF5_SDK_PATH=<path>") message(FATAL_ERROR "The path to the NRF52 SDK must be specified on the command line (add -DNRF5_SDK_PATH=<path>")
endif () endif ()
if(USE_JLINK)
if (NOT NRFJPROG)
message(FATAL_ERROR "the path to the tool nrfjprog must be specified on the command line (add -DNRFJPROG=<path>")
endif ()
endif()
if(USE_GDB_CLIENT)
if(NOT GDB_CLIENT_BIN_PATH)
set(GDB_CLIENT_BIN_PATH "arm-none-eabi-gdb")
endif()
if(NOT GDB_CLIENT_TARGET_REMOTE)
message(FATAL_ERROR "The GDB target must be specified (add -DGDB_CLIENT_TARGET_REMOTE=<target>")
endif()
endif()
if(USE_OPENOCD)
if(NOT OPENOCD_BIN_PATH)
set(OPENOCD_BIN_PATH "openocd")
endif()
endif()
if(DEFINED USE_DEBUG_PINS AND USE_DEBUG_PINS) if(DEFINED USE_DEBUG_PINS AND USE_DEBUG_PINS)
add_definitions(-DUSE_DEBUG_PINS) add_definitions(-DUSE_DEBUG_PINS)
endif() endif()
@ -81,17 +59,6 @@ message(" * Toolchain : " ${ARM_NONE_EABI_TOOLCHAIN_PATH})
message(" * GitRef(S) : " ${PROJECT_GIT_COMMIT_HASH}) message(" * GitRef(S) : " ${PROJECT_GIT_COMMIT_HASH})
message(" * NRF52 SDK : " ${NRF5_SDK_PATH}) message(" * NRF52 SDK : " ${NRF5_SDK_PATH})
message(" * Target device : " ${TARGET_DEVICE}) message(" * Target device : " ${TARGET_DEVICE})
set(PROGRAMMER "???")
if(USE_JLINK)
message(" * Programmer/debugger : JLINK")
message(" * NrfJprog : " ${NRFJPROG})
elseif(USE_GDB_CLIENT)
message(" * Programmer/debugger : GDB Client")
message(" * GDB Client path : " ${GDB_CLIENT_BIN_PATH})
message(" * GDB Target : " ${GDB_CLIENT_TARGET_REMOTE})
elseif(USE_OPENOCD)
message(" * Programmer/debugger : OpenOCD Client")
endif()
if(USE_DEBUG_PINS) if(USE_DEBUG_PINS)
message(" * Debug pins : Enabled") message(" * Debug pins : Enabled")
else() else()

View File

@ -229,24 +229,6 @@ macro(nRF5x_setup)
"${NRF5_SDK_PATH}/modules/nrfx/drivers/src/nrfx_twi.c" "${NRF5_SDK_PATH}/modules/nrfx/drivers/src/nrfx_twi.c"
) )
# adds target for erasing
if(USE_JLINK)
add_custom_target(FLASH_ERASE
COMMAND ${NRFJPROG} --eraseall -f ${NRF_TARGET}
COMMENT "erasing flashing"
)
elseif(USE_GDB_CLIENT)
add_custom_target(FLASH_ERASE
COMMAND ${GDB_CLIENT_BIN_PATH} -nx --batch -ex 'target extended-remote ${GDB_CLIENT_TARGET_REMOTE}' -ex 'monitor swdp_scan' -ex 'attach 1' -ex 'mon erase_mass'
COMMENT "erasing flashing"
)
elseif(USE_OPENOCD)
add_custom_target(FLASH_ERASE
COMMAND ${OPENOCD_BIN_PATH} -f interface/stlink.cfg -c 'transport select hla_swd' -f target/nrf52.cfg -c init -c halt -c 'nrf5 mass_erase' -c reset -c shutdown
COMMENT "erasing flashing"
)
endif()
if(${CMAKE_HOST_SYSTEM_NAME} STREQUAL "Darwin") if(${CMAKE_HOST_SYSTEM_NAME} STREQUAL "Darwin")
set(TERMINAL "open") set(TERMINAL "open")
elseif(${CMAKE_HOST_SYSTEM_NAME} STREQUAL "Windows") elseif(${CMAKE_HOST_SYSTEM_NAME} STREQUAL "Windows")
@ -255,16 +237,6 @@ macro(nRF5x_setup)
set(TERMINAL "gnome-terminal") set(TERMINAL "gnome-terminal")
endif() endif()
if(USE_JLINK)
add_custom_target(START_JLINK
COMMAND ${TERMINAL} "${DIR_OF_nRF5x_CMAKE}/runJLinkGDBServer-${NRF_TARGET}"
COMMAND ${TERMINAL} "${DIR_OF_nRF5x_CMAKE}/runJLinkExe-${NRF_TARGET}"
COMMAND sleep 2s
COMMAND ${TERMINAL} "${DIR_OF_nRF5x_CMAKE}/runJLinkRTTClient"
COMMENT "started JLink commands"
)
endif()
endmacro(nRF5x_setup) endmacro(nRF5x_setup)
# adds a target for comiling and flashing an executable # adds a target for comiling and flashing an executable
@ -282,29 +254,6 @@ macro(nRF5x_addExecutable EXECUTABLE_NAME SOURCE_FILES)
COMMAND ${CMAKE_OBJCOPY} -O ihex ${EXECUTABLE_NAME}.out "${EXECUTABLE_NAME}.hex" COMMAND ${CMAKE_OBJCOPY} -O ihex ${EXECUTABLE_NAME}.out "${EXECUTABLE_NAME}.hex"
COMMENT "post build steps for ${EXECUTABLE_NAME}") COMMENT "post build steps for ${EXECUTABLE_NAME}")
# custom target for flashing the board
if(USE_JLINK)
add_custom_target("FLASH_${EXECUTABLE_NAME}"
DEPENDS ${EXECUTABLE_NAME}
COMMAND ${NRFJPROG} --program ${EXECUTABLE_NAME}.hex -f ${NRF_TARGET} --sectorerase
COMMAND sleep 0.5s
COMMAND ${NRFJPROG} --reset -f ${NRF_TARGET}
COMMENT "flashing ${EXECUTABLE_NAME}.hex"
)
elseif(USE_GDB_CLIENT)
add_custom_target("FLASH_${EXECUTABLE_NAME}"
DEPENDS ${EXECUTABLE_NAME}
COMMAND ${GDB_CLIENT_BIN_PATH} -nx --batch -ex 'target extended-remote ${GDB_CLIENT_TARGET_REMOTE}' -ex 'monitor swdp_scan' -ex 'attach 1' -ex 'load' -ex 'kill' ${EXECUTABLE_NAME}.hex
COMMENT "flashing ${EXECUTABLE_NAME}.hex"
)
elseif(USE_OPENOCD)
add_custom_target("FLASH_${EXECUTABLE_NAME}"
DEPENDS ${EXECUTABLE_NAME}
COMMAND ${OPENOCD_BIN_PATH} -c "tcl_port disabled" -c "gdb_port 3333" -c "telnet_port 4444" -f interface/stlink.cfg -c 'transport select hla_swd' -f target/nrf52.cfg -c "program \"${EXECUTABLE_NAME}.hex\"" -c reset -c shutdown
COMMENT "flashing ${EXECUTABLE_NAME}.hex"
)
endif()
endmacro() endmacro()
# adds app-level scheduler library # adds app-level scheduler library

View File

@ -40,11 +40,7 @@ CMake configures the project according to variables you specify the command line
----------|-------------|--------| ----------|-------------|--------|
**ARM_NONE_EABI_TOOLCHAIN_PATH**|path to the toolchain directory|`-DARM_NONE_EABI_TOOLCHAIN_PATH=/home/jf/nrf52/gcc-arm-none-eabi-10.3-2021.10/`| **ARM_NONE_EABI_TOOLCHAIN_PATH**|path to the toolchain directory|`-DARM_NONE_EABI_TOOLCHAIN_PATH=/home/jf/nrf52/gcc-arm-none-eabi-10.3-2021.10/`|
**NRF5_SDK_PATH**|path to the NRF52 SDK|`-DNRF5_SDK_PATH=/home/jf/nrf52/Pinetime/sdk`| **NRF5_SDK_PATH**|path to the NRF52 SDK|`-DNRF5_SDK_PATH=/home/jf/nrf52/Pinetime/sdk`|
**USE_JLINK, USE_GDB_CLIENT and USE_OPENOCD**|Enable *JLink* mode, *GDB Client* (Black Magic Probe) mode or *OpenOCD* mode (set the one you want to use to `1`)|`-DUSE_JLINK=1`
**CMAKE_BUILD_TYPE (\*)**| Build type (Release or Debug). Release is applied by default if this variable is not specified.|`-DCMAKE_BUILD_TYPE=Debug` **CMAKE_BUILD_TYPE (\*)**| Build type (Release or Debug). Release is applied by default if this variable is not specified.|`-DCMAKE_BUILD_TYPE=Debug`
**NRFJPROG**|Path to the NRFJProg executable. Used only if `USE_JLINK` is 1.|`-DNRFJPROG=/opt/nrfjprog/nrfjprog`
**GDB_CLIENT_BIN_PATH**|Path to arm-none-eabi-gdb executable. Used only if `USE_GDB_CLIENT` is 1.|`-DGDB_CLIENT_BIN_PATH=/home/jf/nrf52/gcc-arm-none-eabi-9-2019-q4-major/bin/arm-none-eabi-gdb`
**GDB_CLIENT_TARGET_REMOTE**|Target remote connection string. Used only if `USE_GDB_CLIENT` is 1.|`-DGDB_CLIENT_TARGET_REMOTE=/dev/ttyACM0`
**BUILD_DFU (\*\*)**|Build DFU files while building (needs [adafruit-nrfutil](https://github.com/adafruit/Adafruit_nRF52_nrfutil)).|`-DBUILD_DFU=1` **BUILD_DFU (\*\*)**|Build DFU files while building (needs [adafruit-nrfutil](https://github.com/adafruit/Adafruit_nRF52_nrfutil)).|`-DBUILD_DFU=1`
**BUILD_RESOURCES (\*\*)**| Generate external resource while building (needs [lv_font_conv](https://github.com/lvgl/lv_font_conv) and [lv_img_conv](https://github.com/lvgl/lv_img_conv). |`-DBUILD_RESOURCES=1` **BUILD_RESOURCES (\*\*)**| Generate external resource while building (needs [lv_font_conv](https://github.com/lvgl/lv_font_conv) and [lv_img_conv](https://github.com/lvgl/lv_img_conv). |`-DBUILD_RESOURCES=1`
**TARGET_DEVICE**|Target device, used for hardware configuration. Allowed: `PINETIME, MOY-TFK5, MOY-TIN5, MOY-TON5, MOY-UNK`|`-DTARGET_DEVICE=PINETIME` (Default) **TARGET_DEVICE**|Target device, used for hardware configuration. Allowed: `PINETIME, MOY-TFK5, MOY-TIN5, MOY-TON5, MOY-UNK`|`-DTARGET_DEVICE=PINETIME` (Default)
@ -57,30 +53,16 @@ The *Debug* mode disables all optimizations, which makes the code easier to debu
#### (\*\*) Note about **BUILD_DFU** #### (\*\*) Note about **BUILD_DFU**
DFU files are the files you'll need to install your build of InfiniTime using OTA (over-the-air) mechanism. To generate the DFU file, the Python tool [adafruit-nrfutil](https://github.com/adafruit/Adafruit_nRF52_nrfutil) is needed on your system. Check that this tool is properly installed before enabling this option. DFU files are the files you'll need to install your build of InfiniTime using OTA (over-the-air) mechanism. To generate the DFU file, the Python tool [adafruit-nrfutil](https://github.com/adafruit/Adafruit_nRF52_nrfutil) is needed on your system. Check that this tool is properly installed before enabling this option.
#### CMake command line for JLink #### CMake command
``` ```
cmake -DARM_NONE_EABI_TOOLCHAIN_PATH=... -DNRF5_SDK_PATH=... -DUSE_JLINK=1 -DNRFJPROG=... ../ cmake -DARM_NONE_EABI_TOOLCHAIN_PATH=... -DNRF5_SDK_PATH=...
```
#### CMake command line for GDB Client (Black Magic Probe)
```
cmake -DARM_NONE_EABI_TOOLCHAIN_PATH=... -DNRF5_SDK_PATH=... -DUSE_GDB_CLIENT=1 -DGDB_CLIENT_BIN_PATH=... -DGDB_CLIENT_TARGET_REMOTE=... ../
```
#### CMake command line for OpenOCD
```
cmake -DARM_NONE_EABI_TOOLCHAIN_PATH=... -DNRF5_SDK_PATH=... -DUSE_OPENOCD=1 -DGDB_CLIENT_BIN_PATH=[optional] ../
``` ```
### Build the project ### Build the project
During the project generation, CMake created the following targets: During the project generation, CMake created the following targets:
- **FLASH_ERASE** : mass erase the flash memory of the NRF52.
- **FLASH_pinetime-app** : flash the firmware into the NRF52.
- **pinetime-app** : build the standalone (without bootloader support) version of the firmware. - **pinetime-app** : build the standalone (without bootloader support) version of the firmware.
- **pinetime-recovery** : build the standalone recovery version of infinitime (light firmware that only supports OTA and basic UI) - **pinetime-recovery** : build the standalone recovery version of infinitime (light firmware that only supports OTA and basic UI)
- **pinetime-recovery-loader** : build the standalone tool that flashes the recovery firmware into the external SPI flash - **pinetime-recovery-loader** : build the standalone tool that flashes the recovery firmware into the external SPI flash
@ -108,24 +90,6 @@ Binary files are generated into the folder `src`:
The same files are generated for **pinetime-recovery** and **pinetime-recoveryloader** The same files are generated for **pinetime-recovery** and **pinetime-recoveryloader**
### Program and run
#### Using CMake targets
These target have been configured during the project generation by CMake according to the parameters you provided to the command line.
Mass erase:
```
make FLASH_ERASE
```
Flash the application:
```
make FLASH_pinetime-app
```
### How to generate files needed by the factory ### How to generate files needed by the factory
These files are needed by the Pine64 factory to flash InfiniTime as the default firmware on the PineTimes. These files are needed by the Pine64 factory to flash InfiniTime as the default firmware on the PineTimes.

View File

@ -63,7 +63,6 @@ CmakeGenerate() {
-S "$SOURCES_DIR" \ -S "$SOURCES_DIR" \
-B "$BUILD_DIR" \ -B "$BUILD_DIR" \
-DCMAKE_BUILD_TYPE=$BUILD_TYPE \ -DCMAKE_BUILD_TYPE=$BUILD_TYPE \
-DUSE_OPENOCD=1 \
-DARM_NONE_EABI_TOOLCHAIN_PATH="$TOOLS_DIR/$GCC_ARM_PATH" \ -DARM_NONE_EABI_TOOLCHAIN_PATH="$TOOLS_DIR/$GCC_ARM_PATH" \
-DNRF5_SDK_PATH="$TOOLS_DIR/$NRF_SDK_VER" \ -DNRF5_SDK_PATH="$TOOLS_DIR/$NRF_SDK_VER" \
-DBUILD_DFU=1 \ -DBUILD_DFU=1 \

View File

@ -1139,68 +1139,3 @@ if(BUILD_RESOURCES)
add_subdirectory(resources) add_subdirectory(resources)
endif() endif()
# FLASH
if (USE_JLINK)
add_custom_target(FLASH_ERASE
COMMAND ${NRFJPROG} --eraseall -f ${NRF_TARGET}
COMMENT "erasing flashing"
)
add_custom_target("FLASH_${EXECUTABLE_NAME}"
DEPENDS ${EXECUTABLE_NAME}
COMMAND ${NRFJPROG} --program ${EXECUTABLE_FILE_NAME}.hex -f ${NRF_TARGET} --sectorerase
COMMAND sleep 0.5s
COMMAND ${NRFJPROG} --reset -f ${NRF_TARGET}
COMMENT "flashing ${EXECUTABLE_FILE_NAME}.hex"
)
elseif (USE_GDB_CLIENT)
add_custom_target(FLASH_ERASE
COMMAND ${GDB_CLIENT_BIN_PATH} -nx --batch -ex 'target extended-remote ${GDB_CLIENT_TARGET_REMOTE}' -ex 'monitor swdp_scan' -ex 'attach 1' -ex 'mon erase_mass'
COMMENT "erasing flashing"
)
add_custom_target("FLASH_${EXECUTABLE_NAME}"
DEPENDS ${EXECUTABLE_NAME}
COMMAND ${GDB_CLIENT_BIN_PATH} -nx --batch -ex 'target extended-remote ${GDB_CLIENT_TARGET_REMOTE}' -ex 'monitor swdp_scan' -ex 'attach 1' -ex 'load' -ex 'kill' ${EXECUTABLE_FILE_NAME}.hex
COMMENT "flashing ${EXECUTABLE_FILE_NAME}.hex"
)
elseif (USE_OPENOCD)
if (USE_CMSIS_DAP)
add_custom_target(FLASH_ERASE
COMMAND ${OPENOCD_BIN_PATH} -c 'source [find interface/cmsis-dap.cfg]' -c 'transport select swd'
-c 'source [find target/nrf52.cfg]'
-c 'init'
-c 'halt'
-c 'nrf5 mass_erase'
-c 'halt'
-c 'reset'
-c 'exit'
COMMENT "erasing flashing"
)
add_custom_target("FLASH_${EXECUTABLE_NAME}"
DEPENDS ${EXECUTABLE_NAME}
COMMAND ${OPENOCD_BIN_PATH}
-c 'tcl_port disabled'
-c 'gdb_port 3333'
-c 'telnet_port 4444'
-c 'source [find interface/cmsis-dap.cfg]'
-c 'transport select swd'
-c 'source [find target/nrf52.cfg]'
-c 'halt'
-c "program \"${EXECUTABLE_FILE_NAME}.hex\""
-c 'reset'
-c 'shutdown'
COMMENT "flashing ${EXECUTABLE_BIN_NAME}.hex"
)
else ()
add_custom_target(FLASH_ERASE
COMMAND ${OPENOCD_BIN_PATH} -f interface/stlink.cfg -c 'transport select hla_swd' -f target/nrf52.cfg -c init -c halt -c 'nrf5 mass_erase' -c reset -c shutdown
COMMENT "erasing flashing"
)
add_custom_target("FLASH_${EXECUTABLE_NAME}"
DEPENDS ${EXECUTABLE_NAME}
COMMAND ${OPENOCD_BIN_PATH} -c "tcl_port disabled" -c "gdb_port 3333" -c "telnet_port 4444" -f interface/stlink.cfg -c 'transport select hla_swd' -f target/nrf52.cfg -c "program \"${EXECUTABLE_FILE_NAME}.hex\"" -c reset -c shutdown
COMMENT "flashing ${EXECUTABLE_FILE_NAME}.hex"
)
endif ()
endif ()