Convert Spi and GFX to C++.

src/drivers/SpiMaster.cpp

@@ -0,0 +1,88 @@
+#include <hal/nrf_gpio.h>
+#include "SpiMaster.h"
+
+using namespace Pinetime::Drivers;
+
+bool SpiMaster::Init(const SpiMaster::SpiModule spi, const SpiMaster::Parameters &params) {
+  /* Configure GPIO pins used for pselsck, pselmosi, pselmiso and pselss for SPI0 */
+  nrf_gpio_cfg_output(params.pinSCK);
+  nrf_gpio_cfg_output(params.pinMOSI);
+  nrf_gpio_cfg_input(params.pinMISO, NRF_GPIO_PIN_NOPULL);
+  nrf_gpio_cfg_output(params.pinCSN);
+  pinCsn = params.pinCSN;
+
+  switch(spi) {
+    case SpiModule::SPI0: spiBaseAddress = NRF_SPI0; break;
+    case SpiModule::SPI1: spiBaseAddress = NRF_SPI1; break;
+    default: return false;
+  }
+
+  /* Configure pins, frequency and mode */
+  spiBaseAddress->PSELSCK  = params.pinSCK;
+  spiBaseAddress->PSELMOSI = params.pinMOSI;
+  spiBaseAddress->PSELMISO = params.pinMISO;
+  nrf_gpio_pin_set(pinCsn); /* disable Set slave select (inactive high) */
+
+  uint32_t frequency;
+  switch(params.Frequency) {
+    case Frequencies::Freq8Mhz: frequency = 0x80000000; break;
+    default: return false;
+  }
+  spiBaseAddress->FREQUENCY = frequency;
+
+  uint32_t regConfig = 0;
+  switch(params.bitOrder) {
+    case BitOrder::Msb_Lsb: break;
+    case BitOrder::Lsb_Msb: regConfig = 1;
+    default: return false;
+  }
+  switch(params.mode) {
+    case Modes::Mode0: break;
+    case Modes::Mode1: regConfig |= (0x01 << 1); break;
+    case Modes::Mode2: regConfig |= (0x02 << 1); break;
+    case Modes::Mode3: regConfig |= (0x03 << 1); break;
+    default: return false;
+  }
+
+  spiBaseAddress->CONFIG = regConfig;
+  spiBaseAddress->EVENTS_READY = 0;
+  spiBaseAddress->ENABLE = (SPI_ENABLE_ENABLE_Enabled << SPI_ENABLE_ENABLE_Pos);
+
+  return true;
+}
+
+bool SpiMaster::Write(const uint8_t *data, size_t size) {
+  volatile uint32_t dummyread;
+
+  if(data == nullptr) return false;
+
+  /* enable slave (slave select active low) */
+  nrf_gpio_pin_clear(pinCsn);
+
+  spiBaseAddress->EVENTS_READY = 0;
+
+  spiBaseAddress->TXD = (uint32_t)*data++;
+
+  while(--size)
+  {
+    spiBaseAddress->TXD =  (uint32_t)*data++;
+
+    /* Wait for the transaction complete or timeout (about 10ms - 20 ms) */
+    while (spiBaseAddress->EVENTS_READY == 0);
+
+    /* clear the event to be ready to receive next messages */
+    spiBaseAddress->EVENTS_READY = 0;
+
+    dummyread = spiBaseAddress->RXD;
+  }
+
+  /* Wait for the transaction complete or timeout (about 10ms - 20 ms) */
+  while (spiBaseAddress->EVENTS_READY == 0);
+
+  dummyread = spiBaseAddress->RXD;
+
+  /* disable slave (slave select active low) */
+  nrf_gpio_pin_set(pinCsn);
+
+  return true;
+}