CMake: Fix indentation
This commit is contained in:
Christoph Honal
JF
parent
e247afaa81
commit
91c69d3c5b
|
|
@ -9,21 +9,21 @@ set(NRF_BOARD pca10040)
|
|||
|
||||
# check if all the necessary tools paths have been provided.
|
||||
if (NOT NRF5_SDK_PATH)
|
||||
message(FATAL_ERROR "The path to the nRF5 SDK (NRF5_SDK_PATH) must be set.")
|
||||
message(FATAL_ERROR "The path to the nRF5 SDK (NRF5_SDK_PATH) must be set.")
|
||||
endif ()
|
||||
if (DEFINED ARM_NONE_EABI_TOOLCHAIN_PATH)
|
||||
set(ARM_NONE_EABI_TOOLCHAIN_BIN_PATH ${ARM_NONE_EABI_TOOLCHAIN_PATH}/bin)
|
||||
set(ARM_NONE_EABI_TOOLCHAIN_BIN_PATH ${ARM_NONE_EABI_TOOLCHAIN_PATH}/bin)
|
||||
endif ()
|
||||
|
||||
if (NOT NRF_TARGET MATCHES "nrf52")
|
||||
message(FATAL_ERROR "Only rRF52 boards are supported right now")
|
||||
message(FATAL_ERROR "Only rRF52 boards are supported right now")
|
||||
endif ()
|
||||
|
||||
# Setup toolchain
|
||||
include(${CMAKE_SOURCE_DIR}/cmake-nRF5x/arm-gcc-toolchain.cmake)
|
||||
|
||||
if (NOT DEFINED ARM_GCC_TOOLCHAIN)
|
||||
message(FATAL_ERROR "The toolchain must be set up before calling this macro")
|
||||
message(FATAL_ERROR "The toolchain must be set up before calling this macro")
|
||||
endif ()
|
||||
set(CMAKE_OSX_SYSROOT "/")
|
||||
set(CMAKE_OSX_DEPLOYMENT_TARGET "")
|
||||
|
|
@ -936,11 +936,11 @@ add_custom_command(TARGET ${EXECUTABLE_MCUBOOT_NAME}
|
|||
)
|
||||
|
||||
if(BUILD_DFU)
|
||||
add_custom_command(TARGET ${EXECUTABLE_MCUBOOT_NAME}
|
||||
POST_BUILD
|
||||
COMMAND adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application ${IMAGE_MCUBOOT_FILE_NAME} ${DFU_MCUBOOT_FILE_NAME}
|
||||
COMMENT "post build (DFU) steps for ${EXECUTABLE_MCUBOOT_FILE_NAME}"
|
||||
)
|
||||
add_custom_command(TARGET ${EXECUTABLE_MCUBOOT_NAME}
|
||||
POST_BUILD
|
||||
COMMAND adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application ${IMAGE_MCUBOOT_FILE_NAME} ${DFU_MCUBOOT_FILE_NAME}
|
||||
COMMENT "post build (DFU) steps for ${EXECUTABLE_MCUBOOT_FILE_NAME}"
|
||||
)
|
||||
endif()
|
||||
|
||||
# InfiniTime recovery firmware (autonomous)
|
||||
|
|
@ -1005,11 +1005,11 @@ add_custom_command(TARGET ${EXECUTABLE_RECOVERY_MCUBOOT_NAME}
|
|||
)
|
||||
|
||||
if(BUILD_DFU)
|
||||
add_custom_command(TARGET ${EXECUTABLE_RECOVERY_MCUBOOT_NAME}
|
||||
POST_BUILD
|
||||
COMMAND adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application ${IMAGE_RECOVERY_MCUBOOT_FILE_NAME} ${DFU_RECOVERY_MCUBOOT_FILE_NAME}
|
||||
COMMENT "post build (DFU) steps for ${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME}"
|
||||
)
|
||||
add_custom_command(TARGET ${EXECUTABLE_RECOVERY_MCUBOOT_NAME}
|
||||
POST_BUILD
|
||||
COMMAND adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application ${IMAGE_RECOVERY_MCUBOOT_FILE_NAME} ${DFU_RECOVERY_MCUBOOT_FILE_NAME}
|
||||
COMMENT "post build (DFU) steps for ${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME}"
|
||||
)
|
||||
endif()
|
||||
|
||||
# Build binary that writes the recovery image into the SPI flash memory
|
||||
|
|
@ -1080,75 +1080,75 @@ add_custom_command(TARGET ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME}
|
|||
)
|
||||
|
||||
if(BUILD_DFU)
|
||||
add_custom_command(TARGET ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME}
|
||||
POST_BUILD
|
||||
COMMAND adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application ${IMAGE_MCUBOOT_RECOVERYLOADER_FILE_NAME} ${DFU_MCUBOOT_RECOVERYLOADER_FILE_NAME}
|
||||
COMMENT "post build (DFU) steps for ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}"
|
||||
)
|
||||
add_custom_command(TARGET ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME}
|
||||
POST_BUILD
|
||||
COMMAND adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application ${IMAGE_MCUBOOT_RECOVERYLOADER_FILE_NAME} ${DFU_MCUBOOT_RECOVERYLOADER_FILE_NAME}
|
||||
COMMENT "post build (DFU) steps for ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}"
|
||||
)
|
||||
endif()
|
||||
|
||||
|
||||
# FLASH
|
||||
if (USE_JLINK)
|
||||
add_custom_target(FLASH_ERASE
|
||||
COMMAND ${NRFJPROG} --eraseall -f ${NRF_TARGET}
|
||||
COMMENT "erasing flashing"
|
||||
)
|
||||
add_custom_target("FLASH_${EXECUTABLE_NAME}"
|
||||
DEPENDS ${EXECUTABLE_NAME}
|
||||
COMMAND ${NRFJPROG} --program ${EXECUTABLE_FILE_NAME}.hex -f ${NRF_TARGET} --sectorerase
|
||||
COMMAND sleep 0.5s
|
||||
COMMAND ${NRFJPROG} --reset -f ${NRF_TARGET}
|
||||
COMMENT "flashing ${EXECUTABLE_FILE_NAME}.hex"
|
||||
)
|
||||
add_custom_target(FLASH_ERASE
|
||||
COMMAND ${NRFJPROG} --eraseall -f ${NRF_TARGET}
|
||||
COMMENT "erasing flashing"
|
||||
)
|
||||
add_custom_target("FLASH_${EXECUTABLE_NAME}"
|
||||
DEPENDS ${EXECUTABLE_NAME}
|
||||
COMMAND ${NRFJPROG} --program ${EXECUTABLE_FILE_NAME}.hex -f ${NRF_TARGET} --sectorerase
|
||||
COMMAND sleep 0.5s
|
||||
COMMAND ${NRFJPROG} --reset -f ${NRF_TARGET}
|
||||
COMMENT "flashing ${EXECUTABLE_FILE_NAME}.hex"
|
||||
)
|
||||
|
||||
elseif (USE_GDB_CLIENT)
|
||||
add_custom_target(FLASH_ERASE
|
||||
COMMAND ${GDB_CLIENT_BIN_PATH} -nx --batch -ex 'target extended-remote ${GDB_CLIENT_TARGET_REMOTE}' -ex 'monitor swdp_scan' -ex 'attach 1' -ex 'mon erase_mass'
|
||||
COMMENT "erasing flashing"
|
||||
)
|
||||
add_custom_target("FLASH_${EXECUTABLE_NAME}"
|
||||
DEPENDS ${EXECUTABLE_NAME}
|
||||
COMMAND ${GDB_CLIENT_BIN_PATH} -nx --batch -ex 'target extended-remote ${GDB_CLIENT_TARGET_REMOTE}' -ex 'monitor swdp_scan' -ex 'attach 1' -ex 'load' -ex 'kill' ${EXECUTABLE_FILE_NAME}.hex
|
||||
COMMENT "flashing ${EXECUTABLE_FILE_NAME}.hex"
|
||||
)
|
||||
elseif (USE_OPENOCD)
|
||||
if (USE_CMSIS_DAP)
|
||||
add_custom_target(FLASH_ERASE
|
||||
COMMAND ${GDB_CLIENT_BIN_PATH} -nx --batch -ex 'target extended-remote ${GDB_CLIENT_TARGET_REMOTE}' -ex 'monitor swdp_scan' -ex 'attach 1' -ex 'mon erase_mass'
|
||||
COMMAND ${OPENOCD_BIN_PATH} -c 'source [find interface/cmsis-dap.cfg]' -c 'transport select swd'
|
||||
-c 'source [find target/nrf52.cfg]'
|
||||
-c 'init'
|
||||
-c 'halt'
|
||||
-c 'nrf5 mass_erase'
|
||||
-c 'halt'
|
||||
-c 'reset'
|
||||
-c 'exit'
|
||||
COMMENT "erasing flashing"
|
||||
)
|
||||
add_custom_target("FLASH_${EXECUTABLE_NAME}"
|
||||
DEPENDS ${EXECUTABLE_NAME}
|
||||
COMMAND ${GDB_CLIENT_BIN_PATH} -nx --batch -ex 'target extended-remote ${GDB_CLIENT_TARGET_REMOTE}' -ex 'monitor swdp_scan' -ex 'attach 1' -ex 'load' -ex 'kill' ${EXECUTABLE_FILE_NAME}.hex
|
||||
COMMAND ${OPENOCD_BIN_PATH}
|
||||
-c 'tcl_port disabled'
|
||||
-c 'gdb_port 3333'
|
||||
-c 'telnet_port 4444'
|
||||
-c 'source [find interface/cmsis-dap.cfg]'
|
||||
-c 'transport select swd'
|
||||
-c 'source [find target/nrf52.cfg]'
|
||||
-c 'halt'
|
||||
-c "program \"${EXECUTABLE_FILE_NAME}.hex\""
|
||||
-c 'reset'
|
||||
-c 'shutdown'
|
||||
COMMENT "flashing ${EXECUTABLE_BIN_NAME}.hex"
|
||||
)
|
||||
else ()
|
||||
add_custom_target(FLASH_ERASE
|
||||
COMMAND ${OPENOCD_BIN_PATH} -f interface/stlink.cfg -c 'transport select hla_swd' -f target/nrf52.cfg -c init -c halt -c 'nrf5 mass_erase' -c reset -c shutdown
|
||||
COMMENT "erasing flashing"
|
||||
)
|
||||
add_custom_target("FLASH_${EXECUTABLE_NAME}"
|
||||
DEPENDS ${EXECUTABLE_NAME}
|
||||
COMMAND ${OPENOCD_BIN_PATH} -c "tcl_port disabled" -c "gdb_port 3333" -c "telnet_port 4444" -f interface/stlink.cfg -c 'transport select hla_swd' -f target/nrf52.cfg -c "program \"${EXECUTABLE_FILE_NAME}.hex\"" -c reset -c shutdown
|
||||
COMMENT "flashing ${EXECUTABLE_FILE_NAME}.hex"
|
||||
)
|
||||
elseif (USE_OPENOCD)
|
||||
if (USE_CMSIS_DAP)
|
||||
add_custom_target(FLASH_ERASE
|
||||
COMMAND ${OPENOCD_BIN_PATH} -c 'source [find interface/cmsis-dap.cfg]' -c 'transport select swd'
|
||||
-c 'source [find target/nrf52.cfg]'
|
||||
-c 'init'
|
||||
-c 'halt'
|
||||
-c 'nrf5 mass_erase'
|
||||
-c 'halt'
|
||||
-c 'reset'
|
||||
-c 'exit'
|
||||
COMMENT "erasing flashing"
|
||||
)
|
||||
add_custom_target("FLASH_${EXECUTABLE_NAME}"
|
||||
DEPENDS ${EXECUTABLE_NAME}
|
||||
COMMAND ${OPENOCD_BIN_PATH}
|
||||
-c 'tcl_port disabled'
|
||||
-c 'gdb_port 3333'
|
||||
-c 'telnet_port 4444'
|
||||
-c 'source [find interface/cmsis-dap.cfg]'
|
||||
-c 'transport select swd'
|
||||
-c 'source [find target/nrf52.cfg]'
|
||||
-c 'halt'
|
||||
-c "program \"${EXECUTABLE_FILE_NAME}.hex\""
|
||||
-c 'reset'
|
||||
-c 'shutdown'
|
||||
COMMENT "flashing ${EXECUTABLE_BIN_NAME}.hex"
|
||||
)
|
||||
else ()
|
||||
add_custom_target(FLASH_ERASE
|
||||
COMMAND ${OPENOCD_BIN_PATH} -f interface/stlink.cfg -c 'transport select hla_swd' -f target/nrf52.cfg -c init -c halt -c 'nrf5 mass_erase' -c reset -c shutdown
|
||||
COMMENT "erasing flashing"
|
||||
)
|
||||
add_custom_target("FLASH_${EXECUTABLE_NAME}"
|
||||
DEPENDS ${EXECUTABLE_NAME}
|
||||
COMMAND ${OPENOCD_BIN_PATH} -c "tcl_port disabled" -c "gdb_port 3333" -c "telnet_port 4444" -f interface/stlink.cfg -c 'transport select hla_swd' -f target/nrf52.cfg -c "program \"${EXECUTABLE_FILE_NAME}.hex\"" -c reset -c shutdown
|
||||
COMMENT "flashing ${EXECUTABLE_FILE_NAME}.hex"
|
||||
)
|
||||
endif ()
|
||||
endif ()
|
||||
endif ()
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user