InfiniTime/bootloader
2020-06-06 19:28:01 +02:00
..
ota-dfu-python Add python script to DFU from a linux PC to the Pinetime 2020-06-01 15:21:58 +02:00
booloader_app_jlink.ocd Add example scripts to generate mcuboot image, dfu file and program them with openocd. 2020-05-24 17:47:07 +02:00
boot_graphics.h Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory. 2020-06-06 19:28:01 +02:00
create_dfu.sh Add example scripts to generate mcuboot image, dfu file and program them with openocd. 2020-05-24 17:47:07 +02:00
create_image.sh Add example scripts to generate mcuboot image, dfu file and program them with openocd. 2020-05-24 17:47:07 +02:00
flash_bootloader_app.sh Add example scripts to generate mcuboot image, dfu file and program them with openocd. 2020-05-24 17:47:07 +02:00
mynewt_nosemi_4.1.7.elf Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). 2020-05-24 16:36:04 +02:00
mynewt_nosemi_4.1.7.elf.bin Typo in file name. 2020-05-24 17:02:45 +02:00
README.md Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory. 2020-06-06 19:28:01 +02:00

Bootloader

Bootloader graphic

The bootloader loads a graphic (Pinetime logo) from the SPI Flash memory. If this graphic is not loaded in the memory, the LCD will display garbage (the content of the SPI flash memory).

The SPI Flash memory is not accessible via the SWD debugger. Use the firmware 'pinetime-graphics' to load the graphic into memory. All you have to do is build it and program it at address 0x00 :

  • Build:
$ make pinetime-graphics
  • Program (using OpenOCD for example) :
program pinetime-graphics.bin 0
  • Let it run for ~10s (it does nothing for 5 seconds, then write the logo into the SPI memory, then (slowly) displays it on the LCD).

Bootloader binary

The binary comes from https://github.com/lupyuen/pinetime-rust-mynewt/releases/tag/v4.1.7

It must be flash at address 0x00 in the internal flash memory.

Using OpenOCD:

program mynewt_nosemi.elf_4.1.7.bin 0

Application firmware image

Build the binary compatible with the booloader:

make pinetime-mcuboot-app

The binary is located in /src/pinetime-mcuboot-app.bin.

It must me converted into a MCUBoot image using imgtool.py from MCUBoot.

imgtool.py create --align 4 --version 1.0.0 --header-size 32 --slot-size 475136 --pad-header <build directory>/src/pinetime-mcuboot-app.bin image.bin

The image must be then flashed at address 0x8000 in the internal flash memory.

Using OpenOCD:

program image.bin 0x8000

OTA and DFU

Pack the image into a .zip file for the NRF DFU protocol:

adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application image.bin dfu.zip

Use NRFConnect or dfu.py (in /bootloader/ota-dfu-python) to upload the zip file to the device:

sudo dfu.py -z /home/jf/nrf52/bootloader/dfu.zip -a <pinetime MAC address> --legacy

Note : dfu.py is a slightly modified version of this repo.