MarkBryanMilligan
a892c7f0e8
Auto-detect frequency on first hub startup. If frequency is 50Hz, assume 230V. (This should work for 95% of cases)
2022-02-10 13:21:18 -06:00
MarkBryanMilligan
eaf1e4504f
Allow exporting all data in bson, json, or csv formats.
2022-01-29 18:25:19 -06:00
MarkBryanMilligan
ed75ab1f05
Improve 3A+ case, making it easier to take the pi out. Improve the fit of the Z2 case.
...
Make it possible for a hub to reload a config automatically when it changes without being restarted.
Prevent the auto-calibration on first install from being stomped by the app.
Allow updating the hub software via the app.
2022-01-13 14:33:21 -06:00
MarkBryanMilligan
f5066c541f
Add support for adding and removing zwave nodes via software. Support secondary z-wave controllers.
2021-10-28 21:45:56 -05:00
MarkBryanMilligan
d63f6df1fd
Performance improvement for returning energy summaries from DB. Change the way MQTT values are posted. Add a BOM utf-8 char to the BOM csv, yo dawg, bom.
2021-08-29 22:53:41 -05:00
MarkBryanMilligan
de50645a2c
Password reset functionality, ZWave switch schedule improvement, support zwave controller on pi, support relay switches and security sensors.
2021-07-02 12:06:37 -05:00
MarkBryanMilligan
2a5674b736
Allow the pi to be shutdown from the app via bluetooth.
2021-03-06 20:20:55 -06:00
MarkBryanMilligan
16c853bf86
Allow pulling part of the log file from a hub via bluetooth.
2021-02-28 23:36:58 -06:00
MarkBryanMilligan
a75231dc43
Support using one CT to monitor a double breaker by only monitoring one pole and doubling its power.
2021-02-26 10:56:05 -06:00
mmilligan
23026d055f
Might work better if I pass in the password as the password and not the username. Oops.
2021-02-21 19:34:15 -06:00
MarkBryanMilligan
ea07715c46
Support posting power to an MQTT topic for Home Assistant.
2021-02-21 18:56:58 -06:00
Mark Milligan
7075c702df
Allow binary and dimmer switches to be grouped together. Allow a custom host to be sent to the power monitor hubs.
2021-01-30 17:11:12 -06:00
Mark Milligan
1a1acb9cbc
Add BOM generation from within the app.
2021-01-29 17:23:41 -06:00
Mark Milligan
fa606cce84
Allow calibration of all ports on a hub at once in addition to individually.
2021-01-24 12:41:46 -06:00
Mark Milligan
6c6f750691
Set up the hubs to auto-calibrate voltage to a target automatically on first startup to alleviate the need for manual calibration.
2021-01-20 21:55:29 -06:00
Mark Milligan
1334c110ff
Initial Commit
2021-01-14 16:28:24 -06:00
