//#include <Wire.h>
//#include <SFE_MicroOLED.h> //Click here to get the library: http://librarymanager/All#SparkFun_Micro_OLED
#include <SparkFun_Qwiic_OLED.h> // http://librarymanager/All#SparkFun_Qwiic_OLED
#include "EspMQTTClient.h" // http://librarymanager/All#EspMQTTClient https://github.com/plapointe6/EspMQTTClient

EspMQTTClient client(
  "Your WiFi SSID",
  "Your WiFi Password",
  "192.168.1.100",  // homeassistant mqtt
  "espmqtt",   // Can be omitted if not needed
  "Your MQTT Password",   // Can be omitted if not needed
  "espmqtt"      // Client name that uniquely identify your device
);

#define reportingInterval 10000 // how often to sample/publish, in milliseconds
#define PIN_RESET 4
#define LED_BUILTIN 0 // ESP32
//#define LED_BUILTIN 13 // Teensy
//MicroOLED oled(PIN_RESET); // The TwoWire I2C port is passed to .begin instead
QwiicMicroOLED oled;

//int plant1Pin = A0;   // Teensy
int plantPin[] = {35,34,39,38};     // ESP32
int maxSensorValue = 4095; // ESP32

// Qwiic Pro Mini pins
int pin_SDA = 15;
int pin_SCL = 5;

unsigned long last_run = 0;

void onConnectionEstablished() {
  client.publish("esp/status", "{\"status\": \"connected\"}");
}

// the setup function runs once when you press reset or power the board
void setup() {

  Serial.begin(115200);
  Serial.println("Running MultiSoilMoistureSensor on: ");

  pinMode(LED_BUILTIN, OUTPUT);
  // esp32 doesn't have analog pullups
  // for(int i=0;i<(sizeof(plantPin)/sizeof(plantPin[0]));i++){
  //   pinMode(plantPin[i],INPUT_PULLUP);
  // }

  Serial.begin(115200);
  // Wire.begin(); // Teensy
  // oled.begin(0x3D, Wire);
  Wire.begin(pin_SDA, pin_SCL); //Qwiic Pro Mini
  if (!oled.begin()){
    Serial.println("Failed to initialize OLED");
  }

  delay(1000); // Delay 1000 ms
}

// 0-based index read
// returns false for no water
bool readAndPublishSensor(int i) {
  int n = i+1; // plant number
  // maxSensorValue (1023,4095) is bad, 1 is good, 0 is no connection
  int sensorValue = analogRead(plantPin[i]);
  // invert the values so 1.0 is good and 0.01 or value==0 is bad
  int sensorPercent = round(100.0*(maxSensorValue-sensorValue)/maxSensorValue);
  if (sensorValue == 0) {
    sensorPercent = 0;
  }
  char sensorText[32];
  snprintf(sensorText, 31, "%d", sensorPercent); // send MQTT 0 thru 100
  char topic[32];
  snprintf(topic, 31, "esp/plants/%d", n); // 1-based plant number
  client.publish(topic, sensorText);
  Serial.print(topic);
  Serial.print(": ");
  Serial.print(sensorValue);
  Serial.print(" - ");
  Serial.println(sensorText);

  // show on LED with 1-based plant number and 0-100%
  snprintf(sensorText, 31, "%d: %d%%", n, sensorPercent);
  oled.text(0, n*8, sensorText);
  
  return sensorPercent > 50; // over 50% is true/good, under 50% is false/bad
}

// the loop function runs over and over again forever
void loop() {
  unsigned long time_trigger = millis();
  if (last_run == 0 || time_trigger-last_run > reportingInterval) {
    oled.erase();
    oled.text(0, 0, "Water:");
    bool showLed = false;
    // read + output plant sensors
    for(int i=0;i<(sizeof(plantPin)/sizeof(plantPin[0]));i++){
      if (!readAndPublishSensor(i)) {
        showLed = true;
      };
    }

    if (showLed) {
      digitalWrite(LED_BUILTIN, HIGH);
    } else {
      digitalWrite(LED_BUILTIN, LOW);
    }

    oled.display();
    last_run = time_trigger;
  }
  client.loop();
  sleep(1);
}