Open_Access_Control_Ethernet/README.txt

54 lines
1.6 KiB
Plaintext
Raw Normal View History

2012-08-09 06:00:00 +00:00
/* Open Access Control for Hacker Spaces - Ethernet Branch
* Branch last modified by HeatSync Labs
* https://github.com/zyphlar/Open_Access_Control_Ethernet
* by Will Bradley
*
* Upstream created by 23B Shop Hacker Space
2012-08-09 05:55:07 +00:00
* http://blog.shop.23b.org
* by John Norman and Dan Lozano
2012-08-09 06:00:00 +00:00
* Readme updated 8/8/2012
2012-08-09 05:55:07 +00:00
*/
2012-08-09 06:00:00 +00:00
For the latest version of THIS BRANCH, visit:
https://github.com/zyphlar/Open_Access_Control_Ethernet
For the latest version of the UPSTREAM software, visit:
2012-08-09 05:55:07 +00:00
http://code.google.com/p/open-access-control/
Note: Unpack the libraries (WIEGAND26, DS1307, PCATTACH) into your arduino
libraries directory. This is usually:
~/arduino/hardware/libraries/
2012-09-27 06:21:03 +00:00
(restart the Arduino program afterwards to apply the changes.)
2012-08-09 05:55:07 +00:00
The hardware design for the Open Access Control for Hacker Spaces uses the Arduino
board with Atmega 328. It has been tested with:
-Arduino Uno
-Arduino Duemilanove
-Freeduino through hole (NKC)
The software has the following features:
-Shield compatible with Arduino
-Designed for use with Wiegand26 format readers (up to 3 support in software)
-DS1307 Real-time clock support
-(2) Wiegand26 reader inputs (optoisolated)
-(4) Alarm zone monitor ports using Analog0..3
-(4) Relay outputs
2013-11-22 21:02:05 +00:00
USAGE:
2012-08-09 05:55:07 +00:00
The following pin assignments are assumed by this software:
-Pins 2,3 for Reader 1
-Pins 4,5 for Reader 2
-Pins 5,6,7,8 for Relays
-Pins A0,A1,A2,A3 for alarm sensors
-Pins A4,A5 for SDA,SCL (I2C)
2012-08-30 06:26:15 +00:00
2013-11-22 21:02:05 +00:00
You'll need to adjust the IPAddress and the PRIVPASSWORD to fit your environment/preferences.
2012-08-30 06:26:15 +00:00
(g*32767+G-1)/2