will/Open_Access_Control_Ethernet
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Arduino Ethernet code for 23b's Open Access Control system
25 Commits 2 Branches 1 Tag 97 KiB
C++ 100%
0.05
Go to file
Will Bradley 055754b484 Fixing issue #5 where door would remain unlocked when user presents a card. Also fixed #6 where F2 was logged unnecessarily.
2013-03-21 08:21:37 -07:00
DS1307 Switched to server mode instead of client mode 2012-08-18 23:09:30 -07:00
PCATTACH Updated libraries to be Arduino 1.0 compatible 2012-08-16 23:23:38 -07:00
Wiegand26 Updated libraries to be Arduino 1.0 compatible 2012-08-16 23:23:38 -07:00
Open_Access_Control_Ethernet.ino Fixing issue #5 where door would remain unlocked when user presents a card. Also fixed #6 where F2 was logged unnecessarily. 2013-03-21 08:21:37 -07:00
README.txt Fixing issue #5 where door would remain unlocked when user presents a card. Also fixed #6 where F2 was logged unnecessarily. 2013-03-21 08:21:37 -07:00

README.txt 

/* Open Access Control for Hacker Spaces - Ethernet Branch
 * Branch last modified by HeatSync Labs
 * https://github.com/zyphlar/Open_Access_Control_Ethernet
 * by Will Bradley
 * 
 * Upstream created by 23B Shop Hacker Space
 * http://blog.shop.23b.org
 * by John Norman and Dan Lozano
 * Readme updated 8/8/2012
*/

For the latest version of THIS BRANCH, visit:
https://github.com/zyphlar/Open_Access_Control_Ethernet

For the latest version of the UPSTREAM software, visit:
http://code.google.com/p/open-access-control/

Note: Unpack the libraries (WIEGAND26, DS1307, PCATTACH) into your arduino
libraries directory.  This is usually:

~/arduino/hardware/libraries/
(restart the Arduino program afterwards to apply the changes.)

The hardware design for the Open Access Control for Hacker Spaces uses the Arduino 
board with Atmega 328. It has been tested with:

-Arduino Uno
-Arduino Duemilanove
-Freeduino through hole (NKC)

The software has the following features:
-Shield compatible with Arduino
-Designed for use with Wiegand26 format readers (up to 3 support in software)
-DS1307 Real-time clock support
-(2) Wiegand26 reader inputs (optoisolated)
-(4) Alarm zone monitor ports using Analog0..3
-(4) Relay outputs


The following pin assignments are assumed by this software:

-Pins 2,3 for Reader 1
-Pins 4,5 for Reader 2
-Pins 5,6,7,8 for Relays
-Pins A0,A1,A2,A3 for alarm sensors
-Pins A4,A5 for SDA,SCL (I2C)

(g*32767+G-1)/2