Baby Walker Ball Toy:

Left side
1 - K1 (button)   
2 - K2            
3 - NC
4 - GND          
5 - VCC 4.5V      
6 - GND isolated
7 - K3            
8 - LED1          

Right side (starting with top, opposite L1; not counter-clockwise)
9 - NC
10 - GND
11 - SPK1         
12 - SPK2         
13 - VCC 4.5V
14 - NC
15 - LED3         
16 - LED2         




# Flex Adapter Design Notes

## Purpose
Create a small flex-style PCB connector adapter with:
- One end solderable directly onto a TSSOP-16 footprint using castellated edge contacts.
- One end shaped as an 8-contact FPC/FFC finger tail.

## Selected FPC Connector Target
- Target connector: JUSHUO AFC01-S08FCA-00
- LCSC/JLCPCB part: C262657
- Positions: 8
- Pitch: 0.5 mm
- Contact style: bottom contact, right-angle FPC/FFC connector
- Mating tail thickness: 0.3 mm

## Physical Geometry Implemented
- Board: 22 mm x 5 mm, 2-layer stackup.
- TSSOP/castellated end:
  - 8 contacts per side, 16 castellation pads total.
  - 1.125 mm pitch along the long axis.
  - 9.0 mm nominal contact-field length.
  - 4.4 mm spacing between opposing castellation rows.
- FPC end:
  - 8 exposed copper fingers.
  - 0.5 mm pitch.
  - 0.30 mm finger width.
  - 4.5 mm exposed finger length.

## Pin Mapping Assumption
Because the user requested an 8-pin FPC end but a TSSOP-16 solder footprint end, this design treats each opposing pair of TSSOP castellations as one duplicated signal:
- TSSOP L1/R1 -> FPC 1
- TSSOP L2/R2 -> FPC 2
- TSSOP L3/R3 -> FPC 3
- TSSOP L4/R4 -> FPC 4
- TSSOP L5/R5 -> FPC 5
- TSSOP L6/R6 -> FPC 6
- TSSOP L7/R7 -> FPC 7
- TSSOP L8/R8 -> FPC 8

If all 16 TSSOP pads must be independent, the FPC end must be changed to 16 positions or the design must define which TSSOP pads are intentionally shorted.

## Manufacturing Notes
- The custom edge pads are PCB features, not assembled parts.
- For a true flexible PCB tail, order as flex PCB with stiffener/contact finish requirements appropriate for the selected FPC connector.
- ENIG is recommended for exposed FPC fingers.
- Confirm minimum edge-castellation capability with the fabricator before production.