zyphlar
71 lines
2.2 KiB
Plaintext
71 lines
2.2 KiB
Plaintext
Baby Walker Ball Toy:
|
|
|
|
Left side
|
|
1 - K1 (button) - FPC1
|
|
2 - K2 - FPC2
|
|
3 - NC
|
|
4 - GND - FPC3
|
|
5 - VCC 4.5V - FPC4
|
|
6 - GND isolated
|
|
7 - K3 - FPC5
|
|
8 - LED1 - FPC6
|
|
|
|
Right side (starting with top, opposite L1; not counter-clockwise)
|
|
9 - NC
|
|
10 - GND
|
|
11 - SPK1 - FPC10
|
|
12 - SPK2 - FPC9
|
|
13 - VCC 4.5V
|
|
14 - NC
|
|
15 - LED3 - FPC8
|
|
16 - LED2 - FPC7
|
|
|
|
|
|
|
|
|
|
# Flex Adapter Design Notes
|
|
|
|
## Purpose
|
|
Create a small flex-style PCB connector adapter with:
|
|
- One end solderable directly onto a TSSOP-16 footprint using castellated edge contacts.
|
|
- One end shaped as an 8-contact FPC/FFC finger tail.
|
|
|
|
## Selected FPC Connector Target
|
|
- Target connector: JUSHUO AFC01-S08FCA-00
|
|
- LCSC/JLCPCB part: C262657
|
|
- Positions: 8
|
|
- Pitch: 0.5 mm
|
|
- Contact style: bottom contact, right-angle FPC/FFC connector
|
|
- Mating tail thickness: 0.3 mm
|
|
|
|
## Physical Geometry Implemented
|
|
- Board: 22 mm x 5 mm, 2-layer stackup.
|
|
- TSSOP/castellated end:
|
|
- 8 contacts per side, 16 castellation pads total.
|
|
- 1.125 mm pitch along the long axis.
|
|
- 9.0 mm nominal contact-field length.
|
|
- 4.4 mm spacing between opposing castellation rows.
|
|
- FPC end:
|
|
- 8 exposed copper fingers.
|
|
- 0.5 mm pitch.
|
|
- 0.30 mm finger width.
|
|
- 4.5 mm exposed finger length.
|
|
|
|
## Pin Mapping Assumption
|
|
Because the user requested an 8-pin FPC end but a TSSOP-16 solder footprint end, this design treats each opposing pair of TSSOP castellations as one duplicated signal:
|
|
- TSSOP L1/R1 -> FPC 1
|
|
- TSSOP L2/R2 -> FPC 2
|
|
- TSSOP L3/R3 -> FPC 3
|
|
- TSSOP L4/R4 -> FPC 4
|
|
- TSSOP L5/R5 -> FPC 5
|
|
- TSSOP L6/R6 -> FPC 6
|
|
- TSSOP L7/R7 -> FPC 7
|
|
- TSSOP L8/R8 -> FPC 8
|
|
|
|
If all 16 TSSOP pads must be independent, the FPC end must be changed to 16 positions or the design must define which TSSOP pads are intentionally shorted.
|
|
|
|
## Manufacturing Notes
|
|
- The custom edge pads are PCB features, not assembled parts.
|
|
- For a true flexible PCB tail, order as flex PCB with stiffener/contact finish requirements appropriate for the selected FPC connector.
|
|
- ENIG is recommended for exposed FPC fingers.
|
|
- Confirm minimum edge-castellation capability with the fabricator before production. |