V2 3D print

This commit is contained in:
Will Bradley 2024-04-15 23:11:18 -07:00
parent 6bd5f9ebdb
commit 5d55677938
Signed by: will
GPG Key ID: 1159B930701263F3
7 changed files with 72 additions and 33 deletions

View File

@ -1,3 +1,4 @@
include <BOSL2/std.scad> include <BOSL2/std.scad>
$fn=20; $fn=20;
@ -7,8 +8,17 @@ showAnchors=0;
showDoor=1; showDoor=1;
showSeparateObjects=0; showSeparateObjects=0;
// split for smaller print beds
// will be automatically moved -60mm for the
// bottom offset (0 is modeled as where the door stops)
// ~490 is the total length
splitAt = [
490/3*1-20,
490/3*2-20
];
// model sizes // model sizes
panelThickness=3; panelThickness=4.5;
// door measurements // door measurements
doorGutter=6; doorGutter=6;
@ -47,39 +57,60 @@ if(showDoor) {
} }
} }
module limitSwitchMount(){
switchHeight = 7;
switchWidth = 12;
switchLength = 20;
switchHoleFromFront = 9; // we assume "front" is the left here, adjust for right
switchHoleFromSide = 5.5;
switchHoleSpacing = 9;
// switch mount
difference(){
cuboid([switchWidth,switchLength,switchHeight], rounding=1, anchor=FRONT+LEFT+BOTTOM);
translate([switchHoleFromFront, switchHoleFromSide, 10/2+switchHeight/2+0.1]) {
cylinder(h=10, r=1.2, center=true);
}
translate([switchHoleFromFront, switchHoleFromSide+switchHoleSpacing, 10/2+switchHeight/2+0.1]) {
cylinder(h=10, r=1.2, center=true);
}
}
}
module topPanel(){ module topPanel(){
translate([doorGutter,230,0]){ translate([doorGutter,230,0]){
translate([15,-2,0]) cuboid([4,145+(2*INCH),10], rounding=1, edges=["Y"], anchor=FRONT+LEFT+BOTTOM);
difference(){ difference(){
cuboid([40,145,panelThickness], rounding=1, edges=["Y",BACK], anchor=FRONT+LEFT+BOTTOM) { cuboid([40,145+(2*INCH),panelThickness], rounding=1, edges=["Y",BACK], anchor=FRONT+LEFT+BOTTOM) {
if (showSeparateObjects) { if (showSeparateObjects) {
// limit switch
translate([0,-12-65,0]) position(TOP+BACK) color("purple") rotate(90) import("limit-switch-mount-sideways.stl");
// servo mount
translate([17.8,-42,20]) position(TOP+BACK+LEFT) rotate([0,0,90]) color("teal") import("Futaba_3001_Servo_Mount.stl");
// servo // servo
translate([44,-31.5,31]) position(TOP+BACK+LEFT) rotate([0,0,90]) color("gray") import("servo futaba s3003 v6.stl"); translate([44,-31.5,31]) position(TOP+BACK+LEFT) rotate([0,0,90]) color("gray") import("servo futaba s3003 v6.stl");
// top pulley // top pulley
translate([-10,-21,31]) position(TOP+BACK+LEFT) rotate([0,90,0]) color("red") import("parametric_ball_pulley-improved-with-flares.stl"); translate([-10,-21,31]) position(TOP+BACK+LEFT) rotate([0,90,0]) color("red") import("parametric_ball_pulley-improved-with-flares.stl");
} }
// servo mount holes // limit switch mount
translate([6,-12-77.5,0]) position(TOP+BACK) color("pink") rotate(90) limitSwitchMount();
// servo mount
translate([17.8,-42,20]) position(TOP+BACK+LEFT) rotate([0,0,90]) color("pink") import("Futaba_3001_Servo_Mount.stl");
difference(){ difference(){
translate([0,-1,0]) position(TOP+BACK+LEFT) cuboid([40,61,19], rounding=1, anchor=BACK+LEFT+BOTTOM); translate([0,-1,0]) position(TOP+BACK+LEFT) cuboid([40,61,19], rounding=1, anchor=BACK+LEFT+BOTTOM);
translate([26.6,-20.1,10]) position(TOP+BACK+LEFT) $fn=40;
translate([2,-21,3]) position(TOP+BACK+LEFT) rotate([0,90,0]) cyl(h=5,d=55, anchor=RIGHT);
// servo mount holes
/*translate([26.6,-20.1,10]) position(TOP+BACK+LEFT)
cyl(h=10,d=2, anchor=BACK+LEFT+BOTTOM); cyl(h=10,d=2, anchor=BACK+LEFT+BOTTOM);
translate([26.6,-41.5,10]) position(TOP+BACK+LEFT) translate([26.6,-41.5,10]) position(TOP+BACK+LEFT)
cyl(h=10,d=2, anchor=BACK+LEFT+BOTTOM); cyl(h=10,d=2, anchor=BACK+LEFT+BOTTOM);*/
} }
} }
// mounting hole // mounting hole
translate([29,37,0]) { translate([29,37,-0.1]) {
cyl(h=panelThickness+1,d=5, anchor=BOTTOM); cyl(h=panelThickness+1,d=5, anchor=BOTTOM);
translate([0,0,panelThickness-2]) translate([0,0,panelThickness-2])
cyl(h=3,d=15, chamfer1=0.5, anchor=BOTTOM); cyl(h=3,d=15, chamfer1=0.5, anchor=BOTTOM);
} translate([7,0,0])
// limit switch hole cuboid([15,5,panelThickness+1], anchor=BOTTOM);
translate([32,74.1,0]) {
cyl(h=panelThickness+1,d=2, anchor=BOTTOM);
} }
} }
} }
@ -87,10 +118,11 @@ module topPanel(){
module middlePanel(){ module middlePanel(){
translate([doorGutter,85,0]) { translate([doorGutter,85,0]) {
translate([15,0,0]) cuboid([4,145,10], rounding=1, edges=["Y"], anchor=FRONT+LEFT+BOTTOM);
cuboid([40,145,panelThickness], rounding=1, edges=["Y"], anchor=FRONT+LEFT+BOTTOM) { cuboid([40,145,panelThickness], rounding=1, edges=["Y"], anchor=FRONT+LEFT+BOTTOM) {
if (showSeparateObjects) { if (showSeparateObjects) {
//arduino //arduino
translate([20,0,0]) color("green") position(TOP) cuboid([2*INCH,2.5*INCH,1*INCH], anchor=BOTTOM); translate([25,0,0]) color("green") position(TOP) cuboid([2*INCH,2.5*INCH,1*INCH], anchor=BOTTOM);
} }
} }
} }
@ -98,11 +130,10 @@ module middlePanel(){
module bottomPanel(){ module bottomPanel(){
translate([doorGutter,-60,0]) { translate([doorGutter,-60,0]) {
translate([15,2,0]) cuboid([4,145,10], rounding=1, edges=["Y"], anchor=FRONT+LEFT+BOTTOM);
difference() { difference() {
cuboid([40,145,panelThickness], rounding=1, edges=["Y",FRONT], anchor=FRONT+LEFT+BOTTOM) { cuboid([40,145,panelThickness], rounding=1, edges=["Y",FRONT], anchor=FRONT+LEFT+BOTTOM) {
if (showSeparateObjects) { if (showSeparateObjects) {
// limit switch
translate([0,60,0]) position(TOP+FRONT) rotate(90) color("purple") import("limit-switch-mount-sideways-right.stl");
// bottom pulley // bottom pulley
translate([-3,-5,27.5]) position(TOP+FRONT+LEFT) color("teal") import("LBracket_Parametric_rev9.stl"); translate([-3,-5,27.5]) position(TOP+FRONT+LEFT) color("teal") import("LBracket_Parametric_rev9.stl");
translate([-10,14,31]) position(TOP+FRONT+LEFT) rotate([0,90,0]) color("red") import("parametric_ball_pulley-improved-with-flares.stl"); translate([-10,14,31]) position(TOP+FRONT+LEFT) rotate([0,90,0]) color("red") import("parametric_ball_pulley-improved-with-flares.stl");
@ -115,16 +146,16 @@ module bottomPanel(){
translate([30.7,12.9,20]) position(TOP+FRONT+LEFT) translate([30.7,12.9,20]) position(TOP+FRONT+LEFT)
cyl(h=10,d=2, anchor=FRONT+LEFT+BOTTOM); cyl(h=10,d=2, anchor=FRONT+LEFT+BOTTOM);
} }
// limit switch mount
translate([6,72,0]) position(TOP+FRONT+LEFT) rotate(-90) color("pink") limitSwitchMount();
} }
// mounting hole // mounting hole
translate([29,117,0]) { translate([29,117,-0.1]) {
cyl(h=panelThickness+1,d=5, anchor=BOTTOM); cyl(h=panelThickness+1,d=5, anchor=BOTTOM);
translate([0,0,panelThickness-2]) translate([0,0,panelThickness-2])
cyl(h=3,d=15, chamfer1=0.5, anchor=BOTTOM); cyl(h=3,d=15, chamfer1=0.5, anchor=BOTTOM);
} translate([7,0,0])
// limit switch hole cuboid([15,5,panelThickness+1], anchor=BOTTOM);
translate([32,66,0]) {
cyl(h=panelThickness+1,d=2, anchor=BOTTOM);
} }
} }
} }
@ -136,8 +167,9 @@ difference(){
middlePanel(); middlePanel();
bottomPanel(); bottomPanel();
} }
translate([doorGutter+20,85,0]) scale(0.4) partition_cut_mask(gap=0, cutpath="dovetail", $slop=0.5); for(i=[0: len(splitAt)-1]){
translate([doorGutter+20,230,0]) scale(0.4) partition_cut_mask(gap=0, cutpath="dovetail", $slop=0.5); translate([doorGutter+19.5,splitAt[i]-60,20]) scale([0.5,0.5,1]) partition_cut_mask(gap=0, cutpath="dovetail", $slop=0.5);
}
} }

Binary file not shown.

View File

@ -1,12 +1,12 @@
showAssembled=1; showAssembled=0;
$fn=12; $fn=12;
flagHeight=15; flagHeight=15;
flagWidth=20; flagWidth=25;
flagDepth=10; flagDepth=10;
baseThickness=2; baseThickness=4;
chainHolderDiameter=3; chainHolderDiameter=4;
gutterHeight=5; gutterHeight=5;
gutterWidth=4; gutterWidth=4;
@ -15,12 +15,13 @@ gutterWidth=4;
if (showAssembled) { if (showAssembled) {
wholeModel(); wholeModel();
} else { } else {
translate([0,0,baseThickness]) rotate([180,0,180])
difference(){ difference(){
wholeModel(); wholeModel();
translate([-50,-50,baseThickness]) cube(100); translate([-50,-50,baseThickness]) cube(100);
} }
translate([-50,0,0]) difference(){ translate([-20,0,-baseThickness]) difference(){
wholeModel(); wholeModel();
translate([-50,-50,-100+baseThickness]) cube(100); translate([-50,-50,-100+baseThickness]) cube(100);
} }
@ -37,15 +38,21 @@ module wholeModel(){
cube([flagDepth,flagWidth,flagHeight-gutterHeight], center=true); cube([flagDepth,flagWidth,flagHeight-gutterHeight], center=true);
} }
translate([0,-(flagWidth+20)/2,2/2]){ translate([0,-(flagWidth+20)/2,baseThickness/2]){
difference(){ difference(){
cube([flagDepth,20,baseThickness], center=true); cube([flagDepth,20,baseThickness], center=true);
translate([0,0,0]) translate([0,0,0])
cylinder(h=4,r=2.5,center=true); cylinder(h=baseThickness+1,r=2.5,center=true);
} }
} }
} }
translate([0,0,baseThickness]){ // screw holes
translate([0,flagWidth*.12,flagHeight*.65]) rotate([0,0,0]) cylinder(h=flagHeight/4,d=4.5, center=true);
translate([0,flagWidth*.12,flagHeight/4]) rotate([0,0,0]) cylinder(h=flagHeight+1,d=1.5, center=true);
translate([0,-flagWidth*.45,flagHeight*.65]) rotate([0,0,0]) cylinder(h=flagHeight/4,d=4.5, center=true);
translate([0,-flagWidth*.45,flagHeight/4]) rotate([0,0,0]) cylinder(h=flagHeight+1,d=1.5, center=true);
translate([0,2,baseThickness]){
chainHolder(); chainHolder();
translate([0,chainHolderDiameter+.5,0]) chainHolder(); translate([0,chainHolderDiameter+.5,0]) chainHolder();
} }
@ -55,5 +62,5 @@ module wholeModel(){
module chainHolder() { module chainHolder() {
translate([-flagDepth/3,-flagWidth/2+2,0]) rotate([0,90,0]) cylinder(h=flagDepth/2+1,d=chainHolderDiameter, center=true); translate([-flagDepth/3,-flagWidth/2+2,0]) rotate([0,90,0]) cylinder(h=flagDepth/2+1,d=chainHolderDiameter, center=true);
translate([flagDepth/3,-flagWidth/2+2,0]) rotate([0,90,0]) cylinder(h=flagDepth/2+1,d=chainHolderDiameter, center=true); translate([flagDepth/3,-flagWidth/2+2,0]) rotate([0,90,0]) cylinder(h=flagDepth/2+1,d=chainHolderDiameter, center=true);
translate([0,-flagWidth/2+2,0]) rotate([0,90,0]) cylinder(h=flagDepth,d=0.7, center=true); translate([0,-flagWidth/2+2,0]) rotate([0,90,0]) cylinder(h=flagDepth,d=1, center=true);
} }

BIN
photo.jpg Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 3.1 MiB

BIN
photo.png

Binary file not shown.

Before

Width:  |  Height:  |  Size: 278 KiB