Update README.md

README.md

@@ -31,28 +31,16 @@ Running
 ```
 
 - Automatically login on a Raspberry Pi:
-
-```
-sudo nano /etc/inittab
-```
-
+  - `sudo nano /etc/inittab`
   - Navigate to the following line in inittab
     - `1:2345:respawn:/sbin/getty 115200 tty1`
   - Add a # at the beginning of the line to comment it out
     - `#1:2345:respawn:/sbin/getty 115200 tty1`
   - Add the following line just below the commented line
-
-```
-1:2345:respawn:/bin/login -f pi tty1 </dev/tty1 >/dev/tty1 2>&1
-```
-
+    - `1:2345:respawn:/bin/login -f pi tty1 </dev/tty1 >/dev/tty1 2>&1`
   - This will run the login program with pi user and without any authentication
   - Save and Exit.
     - Press Ctrl+X to exit nano editor followed by Y to save the file and then press Enter to confirm the filename.
   - Reboot the pi and it will boot straight on to the shell prompt pi@raspberrypi without prompting you to enter username or password.
-
 - Run automatically after login:
-
-```
-echo '~/netwatch.py/netwatch.py' > ~/.bash_profile
-```
+  - `echo '~/netwatch.py/netwatch.py' > ~/.bash_profile`