NetWatch.py - Turnkey Network Dashboard
=======================================

Requirements
-----------

- nmap

Installation
------------

    cd python-nmap-0.3.4
    sudo python setup.py install
    cd ..
    cd netaddr-0.7.10
    sudo python setup.py install
    chmod +x netwatch.py

Running
-------

- Manually:

    ./netwatch.py

- Automatically login on a Raspberry Pi:

    sudo nano /etc/inittab

  - Navigate to the following line in inittab
    - 1:2345:respawn:/sbin/getty 115200 tty1
  - Add a # at the beginning of the line to comment it out
    - #1:2345:respawn:/sbin/getty 115200 tty1
  - Add the following line just below the commented line

    1:2345:respawn:/bin/login -f pi tty1 </dev/tty1 >/dev/tty1 2>&1

  - This will run the login program with pi user and without any authentication
  - Save and Exit.
    - Press Ctrl+X to exit nano editor followed by Y to save the file and then press Enter to confirm the filename.
  - Reboot the pi and it will boot straight on to the shell prompt pi@raspberrypi without prompting you to enter username or password.

- Run automatically after login:

    echo '~/netwatch.py/netwatch.py' > ~/.bash_profile