Library Arduino 1.0 compatibility

libraries/ShiftLCD/examples/Backlight/Backlight.pde

@@ -0,0 +1,75 @@
+/*
+  ShiftLCD Library - Backlight
+ 
+ Demonstrates the use a 16x2 LCD display.  The ShiftLCD library works with
+ all LCD displays that are compatible with the Hitachi HD44780 driver.
+ There are many of them out there, and you can usually tell them by the
+ 16-pin interface.
+ 
+ This sketch displays "Hello, World!" and then flashes the display
+ on and off once a second
+ 
+  The circuit:
+ 
+ ---Shift Register 74HC595---
+ * SR Pin 14 to Arduino pin 2
+ * SR Pin 12 to Arduino pin 3
+ * SR Pin 11 to Arduino pin 4
+ * SR Pin  8 to Ground
+ * SR Pin 16 to +5v
+ * SR Pin 13 to Ground
+ * SR Pin 10 to +5v
+ -----Shift Reg to LCD--------
+ * SR Pin 15 to D7
+ * SR Pin 1  to D6
+ * SR Pin 2  to D5
+ * SR Pin 3  to D4
+ * SR Pin 5  to MOSFET gate
+ * SR Pin 6  to Enable
+ * SR Pin 7  to RS
+ -----LCD HD44780-------------
+ * Vss to Ground
+ * Vdd to +5V
+ * Vo  to 10k Wiper
+ * R/W to Ground
+ * 5v  to +5v
+ * Gnd to MOSFET Drain
+ ------N Chanel MOSFET--------
+ * Source to Ground
+ * Gate   to SP Pin 5
+ * Drain  to LCD Gnd
+ * 1k Resistor Between gate and source
+ 
+ For a more detailed schematic, please see my blog:
+ 
+ http://cjparish.blogspot.com/2010/01/controlling-lcd-display-with-shift.html 
+ 
+ Library modified from the original LiquidCrystal Library
+ Example by
+ Chris Parish, January 12th 2010
+ 
+ */
+
+// include the library code:
+#include <ShiftLCD.h>
+
+// initalise the library with the numbers of the interface pins
+ShiftLCD lcd(2,4,3);
+
+void setup()
+{
+  // set up the LCD's number of rows and columns:
+  lcd.begin(16,2);
+  // Output Hello, World!
+  lcd.print("Hello, World!");
+}
+
+void loop()
+{
+  // Turn the backlight on
+  lcd.backlightOn();
+  delay(1000);
+  // Turn the backlight off
+  lcd.backlightOff();
+  delay(1000);
+}