/* User preferences file - Modify this header to use the correct options for your 
 * installation. 
 * Be sure to set the passwords/etc, as the defaul is "1234"
 */ 

/* Hardware options
 *
 */
#define MCU328         // Set this if using any boards other than the "Mega"
#define HWV4STD        // Use this option if using Open access v3 Standard board

#define MCPIOXP        //  Set this if using the v4 hardware with the MCP23017 i2c IO chip
//#define AT24EEPROM     //  Set this if you have the At24C i2c EEPROM chip installed

#define READER2KEYPAD 0 // Set this if your second reader has a keypad


/* Static user List - Implemented as an array for testing and access override 
*/                               
//#define LCDBOARD                      // Uncomment to use LCD board
                                        // Uses the "cLCD" library that extends arduino LCD class
                                        // Has issues - must use a non-standard pinout, disables other MCP IO pins
                                        // Library is from the TC4 Coffee Roaster project
                                        // Download here: http://code.google.com/p/tc4-shield/
                                        
                                        
#define DEBUG 2                         // Set to 4 for display of raw tag numbers in BIN, 3 for decimal, 2 for HEX, 1 for only denied, 0 for never.               
#define VERSION 1.40
#define UBAUDRATE 9600                  // Set the baud rate for the USB serial port

#define PRIVPASSWORD 0x1234             // Console "priveleged mode" password

#define DOORDELAY 5000                  // How long to open door lock once access is granted. (2500 = 2.5s)
#define SENSORTHRESHOLD 100             // Analog sensor change that will trigger an alarm (0..255)
#define KEYPADTIMEOUT 5000              // Timeout for pin pad entry. Users on keypads can enter commands after reader swipe.
#define CARDFORMAT 1                    // Card format
                                        // 0=first 25 raw bytes from card
                                        // 1=First and second parity bits stripped (default for most systems)
#define BEDTIME 23                      //  Set the time to automatically relock front door.
#define BEDTIME_ENABLED 0               //  Determine whether or not to relock front door nightly