open-access-control/libraries/E24C1024/E24C1024.cpp

77 lines
2.4 KiB
C++
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
E24C1024.cpp
AT24C1024 Library for Arduino
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 US
This library is based on several projects:
The Arduino EEPROM library found here:
http://arduino.cc/en/Reference/EEPROM
The 24C256 library found here:
http://www.arduino.cc/playground/Code/I2CEEPROM
The 24C512 library found here:
http://www.arduino.cc/playground/Code/I2CEEPROM24LC512
Our project page is here:
http://www.arduino.cc/playground/Code/I2CEEPROM24C1024
From the datasheet:
The AT24C1024B provides 1,048,576 bits of serial electrically
erasable and programmable read only memory (EEPROM) organized
as 131,072 words of 8 bits each. The devices cascadable
feature allows up to four devices to share a common two-wire
bus.
http://www.atmel.com/dyn/resources/prod_documents/doc5194.pdf
*/
#include <Wire.h>
#include <Arduino.h>
#include "E24C1024.h"
E24C1024::E24C1024(void)
{
Wire.begin();
}
void E24C1024::write(unsigned long dataAddress, uint8_t data)
{
Wire.beginTransmission((uint8_t)((0x500000 | dataAddress) >> 16)); // B1010xxx
Wire.write((uint8_t)((dataAddress & WORD_MASK) >> 8)); // MSB
Wire.write((uint8_t)(dataAddress & 0xFF)); // LSB
Wire.write(data);
Wire.endTransmission();
delay(5);
}
uint8_t E24C1024::read(unsigned long dataAddress)
{
uint8_t data = 0x00;
Wire.beginTransmission((uint8_t)((0x500000 | dataAddress) >> 16)); // B1010xxx
Wire.write((uint8_t)((dataAddress & WORD_MASK) >> 8)); // MSB
Wire.write((uint8_t)(dataAddress & 0xFF)); // LSB
Wire.endTransmission();
Wire.requestFrom(0x50,1);
if (Wire.available()) data = Wire.read();
return data;
}
E24C1024 EEPROM1024;