MarkBryanMilligan
d30fc4b4ce
Fix a bug that was making it impossible to display billing information in the android app.
2022-04-04 17:20:15 -05:00
MarkBryanMilligan
8387216c44
Increase the clearances on the 4B case a little bit so you don't need a rubber mallet to get the Pi in there.
2022-03-10 15:05:08 -06:00
MarkBryanMilligan
119173f2d2
Move the config creation files to their own shaded jar so they can be run from the command line without an IDE or messy classpath specification.
2022-02-25 22:15:54 -06:00
MarkBryanMilligan
c916b25427
Force all console pages to SSL.
2022-02-17 15:26:32 -06:00
MarkBryanMilligan
dabefd1e7c
Update the flanged cases for the 3B and 4B so the screws are recessed.
2022-02-12 15:17:30 -06:00
MarkBryanMilligan
17815bc579
Update to version 1.0.7 for the SD Image.
2022-02-10 16:54:26 -06:00
MarkBryanMilligan
a892c7f0e8
Auto-detect frequency on first hub startup. If frequency is 50Hz, assume 230V. (This should work for 95% of cases)
2022-02-10 13:21:18 -06:00
MarkBryanMilligan
94ebf5fa93
Allow exporting all data in bson, json, or csv formats.
2022-01-29 23:10:04 -06:00
MarkBryanMilligan
eaf1e4504f
Allow exporting all data in bson, json, or csv formats.
2022-01-29 18:25:19 -06:00
MarkBryanMilligan
eeec6cc697
Update hub image link.
2022-01-13 15:01:44 -06:00
MarkBryanMilligan
ed75ab1f05
Improve 3A+ case, making it easier to take the pi out. Improve the fit of the Z2 case.
...
Make it possible for a hub to reload a config automatically when it changes without being restarted.
Prevent the auto-calibration on first install from being stomped by the app.
Allow updating the hub software via the app.
2022-01-13 14:33:21 -06:00
MarkBryanMilligan
88ed044ef7
Update README.md
2022-01-04 17:54:19 -06:00
MarkBryanMilligan
3018a2540f
Update README.md
2021-12-04 10:38:50 -06:00
MarkBryanMilligan
c0a706cc13
Merge branch 'main' of https://github.com/MarkBryanMilligan/LanternPowerMonitor into main
2021-12-03 21:55:32 -06:00
MarkBryanMilligan
9f00c2fb8a
Added a case for the Zero 2 W.
2021-12-03 21:48:13 -06:00
MarkBryanMilligan
e7aefdf896
Update README.md
2021-12-02 17:24:11 -06:00
MarkBryanMilligan
817f97c72a
Update README.md
2021-11-21 14:09:15 -06:00
MarkBryanMilligan
f5066c541f
Add support for adding and removing zwave nodes via software. Support secondary z-wave controllers.
2021-10-28 21:45:56 -05:00
MarkBryanMilligan
88933a2286
Add rudimentary support for DS18B120 Thermometers, MH-Z19B CO2 Sensors, and ZWave.me controllers.
2021-10-26 15:45:13 -05:00
MarkBryanMilligan
883cf7865d
Add billing plans so different plans can be compared. Performance enhancements to charge calculations.
2021-10-18 15:46:25 -05:00
MarkBryanMilligan
ecbf438082
Merge remote-tracking branch 'origin/main' into main
2021-09-07 22:56:50 -05:00
MarkBryanMilligan
0cfdaaa272
Keep track of peak production, peak consumption, peak from grid, and peak to grid values to aid in solar panel and storage sizing.
2021-09-07 22:56:22 -05:00
MarkBryanMilligan
db09633ec7
Update README.md
2021-08-30 00:04:03 -05:00
MarkBryanMilligan
d63f6df1fd
Performance improvement for returning energy summaries from DB. Change the way MQTT values are posted. Add a BOM utf-8 char to the BOM csv, yo dawg, bom.
2021-08-29 22:53:41 -05:00
MarkBryanMilligan
77ceec745c
Update summaries when billing rate configuration changes. Refactor some of the billing rate variable names to be more clear.
2021-08-11 14:12:27 -05:00
MarkBryanMilligan
cb774d1950
Fix some timezone bugs.
2021-08-09 12:43:47 -05:00
MarkBryanMilligan
5a1f97abca
Add some boilerplate to the password reset.
2021-08-07 17:01:11 -05:00
MarkBryanMilligan
8d09ac39f2
Add billing rates and track cost for all energy readings.
2021-08-03 16:47:28 -05:00
MarkBryanMilligan
8221e8ebd5
Make sure the switch states stay in sync across zwave controller nodes. Allow switches to be grouped in a hierarchy.
2021-07-19 15:22:06 -05:00
MarkBryanMilligan
d8da4df1e3
Merge remote-tracking branch 'origin/main' into main
2021-07-15 23:34:26 -05:00
MarkBryanMilligan
3d5cd6500f
Add a rules engine so I can be notified when I forget to close my garage door.
2021-07-15 23:34:15 -05:00
MarkBryanMilligan
0641161956
Merge pull request #19 from sskinnider/main
...
Added mounting flanges to the 3B+ and 4B cases
2021-07-02 12:10:00 -05:00
MarkBryanMilligan
de50645a2c
Password reset functionality, ZWave switch schedule improvement, support zwave controller on pi, support relay switches and security sensors.
2021-07-02 12:06:37 -05:00
ScottS
aa1b157735
Added 4B case with flange Sketchup file
2021-06-18 11:18:52 -04:00
ScottS
7d114a607f
Added Sketchup file
2021-06-18 11:16:41 -04:00
ScottS
3fe334b051
Add flange to 3B+ case
2021-06-18 11:09:56 -04:00
ScottS
17a26a1dd2
Add flange to 4B case
2021-06-18 11:09:29 -04:00
ScottS
5880f55153
Delete LPM_Case_4B_with_Flange.stl
2021-06-18 11:09:00 -04:00
ScottS
4891678c5b
Delete LPM_Case_3B+_With_Flange.stl
2021-06-18 11:08:53 -04:00
ScottS
e94a5aa134
Add files via upload
2021-06-18 11:07:54 -04:00
MarkBryanMilligan
6c2b567536
Update README.md
2021-03-24 12:30:29 -05:00
MarkBryanMilligan
dec8fa8d8c
Add a 3B+ case.
2021-03-10 13:28:00 -06:00
MarkBryanMilligan
494a172d09
Fix 'lifetime' aggregation.
2021-03-06 23:43:57 -06:00
MarkBryanMilligan
2a5674b736
Allow the pi to be shutdown from the app via bluetooth.
2021-03-06 20:20:55 -06:00
MarkBryanMilligan
a43222049d
Fix some timezone bugs.
2021-03-06 15:45:09 -06:00
MarkBryanMilligan
181513c06d
Add a case for the pi4.
2021-03-06 10:12:48 -06:00
MarkBryanMilligan
a31ca7b549
Courtesy of JamesAndrews352, added a flanged case STL for the 3A+ that allows surface mounting.
2021-03-01 11:55:17 -06:00
MarkBryanMilligan
16c853bf86
Allow pulling part of the log file from a hub via bluetooth.
2021-02-28 23:36:58 -06:00
MarkBryanMilligan
11097049e2
Merge remote-tracking branch 'origin/main' into main
2021-02-28 19:24:39 -06:00
MarkBryanMilligan
ae36011b41
Courtesy of JamesAndrews352, STL files have been corrected so they import into various 3d printing software more easily.
2021-02-28 19:23:54 -06:00
