Tried changing to long; not uploading due to size.

Open_Access_Control_Ethernet.ino

@@ -1,7 +1,7 @@
 /*
  * Open Source RFID Access Controller - Ethernet Branch
  *
- * 8/8/2012 v0.01 (branch based on upstream 4/3/2011 v1.32)
+ * 8/29/2012 v0.02 (branch based on upstream 4/3/2011 v1.32)
  * Will Bradley - will@heatsynclabs.org
  * 
  * Upstream:
@@ -82,27 +82,31 @@
 #include <EEPROM.h>       // Needed for saving to non-voilatile memory on the Arduino.
 #include <avr/pgmspace.h> // Allows data to be stored in FLASH instead of RAM
 
-
 #include <Ethernet.h>     // Ethernet stuff
 #include <SPI.h>          
 
-
 #include <DS1307.h>       // DS1307 RTC Clock/Date/Time chip library
 #include <WIEGAND26.h>    // Wiegand 26 reader format libary
 #include <PCATTACH.h>     // Pcint.h implementation, allows for >2 software interupts.
 
 
-/* Static user List - Implemented as an array for testing and access override 
- */                               
+#define PRIVPASSWORD 0x1234             // Console "priveleged mode" password
 
-#define DEBUG 2                         // Set to 2 for display of raw tag numbers in log files, 1 for only denied, 0 for never.               
+// Static user List - Implemented as an array for testing and access override 
 
 #define adam   0xABCDE                  // Name and badge number in HEX. We are not using checksums or site ID, just the whole
 #define bob   0xBCDEF                  // output string from the reader.
 #define carl   0xA1B2C3
 const long  superUserList[] = { adam, bob, carl};  // Super user table (cannot be changed by software)
 
-#define PRIVPASSWORD 0x1234             // Console "priveleged mode" password
+// Enter a MAC address and IP address for your controller below.
+// The IP address will be dependent on your local network:
+byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
+IPAddress ip(192,168,1,177);
+
+// Stuff below here doesn't necessarily need to be edited.
+
+#define DEBUG 2                         // Set to 2 for display of raw tag numbers in log files, 1 for only denied, 0 for never.               
 
 #define DOORDELAY 5000                  // How long to open door lock once access is granted. (2500 = 2.5s)
 #define SENSORTHRESHOLD 100             // Analog sensor change that will trigger an alarm (0..255)
@@ -178,16 +182,10 @@ unsigned long keypadValue=0;
 boolean privmodeEnabled = false;                               // Switch for enabling "priveleged" commands
 
 // Log buffer
-char logKeys[40]={0};
-int logData[40]={0};
+char logKeys[10]={0};
+long logData[10]={0};
 int logCursor=0;
 
-
-// Enter a MAC address and IP address for your controller below.
-// The IP address will be dependent on your local network:
-byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
-IPAddress ip(192,168,1,177);
-
 // Initialize the Ethernet server library
 // with the IP address and port you want to use 
 // (port 80 is default for HTTP):
@@ -207,13 +205,13 @@ PCATTACH pcattach;    // Software interrupt library
 
 const prog_uchar httpheaderok[]   PROGMEM  = {"HTTP/1.1 200 OK\r\nCache-Control: no-store\r\nContent-Type: text/html\r\n\r\n"};
 const prog_uchar title[]          PROGMEM  = {"<h2>OAC</h2>"};
-const prog_uchar help[]           PROGMEM  = {"<hr/><pre>Numbers must be padded.\n\n?e=0000 - enable privileged (enter 0 to logout)\n?s000 - show user\n?m000&p000&t00000000 - modify user(0-200) permission(0-255) tag(00000000-ffffffff)\n?a - list all users\n?r000 - remove user\n?o1 ?o2 - open door 1/2\n?u ?u=1 ?u=2 - unlock all/1/2\n?l - lock all\n?1 - disarm\n?2 - arm\n?3 - train\n?9 - status\n?z - show log\n?y - clear log</pre>"};    //\n?d=00&w=0&m=00&y=00&h=00&i=00&s=00 - set day-dayofweek-month-year-hour-min-sec
+const prog_uchar help[]           PROGMEM  = {"<hr/><pre>Numbers must be padded.\n\n?e=0000 - login (0s to logout)\n?s000 - show user\n?m000&p000&t00000000 - modify user(0-200) perm(0-255) tag(0-f)\n?a - list all users\n?r000 - remove user\n?o1 ?o2 - open door 1/2\n?u ?u=1 ?u=2 - unlock all/1/2\n?l - lock all\n?1 - disarm\n?2 - arm\n?3 - train\n?9 - status\n?z - log\n?y - clear log</pre>"};    //\n?d=00&w=0&m=00&y=00&h=00&i=00&s=00 - set day-dayofweek-month-year-hour-min-sec
 const prog_uchar noauth[]         PROGMEM  = {"<a href='/'>Not logged in.</a>"};
-const prog_uchar unlockboth[]     PROGMEM  = {"Unlocked all doors."};
+const prog_uchar unlockboth[]     PROGMEM  = {"Unlocked all."};
 const prog_uchar unlock1[]        PROGMEM  = {"Unlocked door 1."};
 const prog_uchar unlock2[]        PROGMEM  = {"Unlocked door 2."};
-const prog_uchar open1[]          PROGMEM  = {"Opened door 1 for a few seconds."};
-const prog_uchar open2[]          PROGMEM  = {"Opened door 2 for a few seconds."};
+const prog_uchar open1[]          PROGMEM  = {"Temp opened door 1."};
+const prog_uchar open2[]          PROGMEM  = {"Temp opened door 2."};
 const prog_uchar lockboth[]       PROGMEM  = {"Locked all doors."};
 
 void setup(){           // Runs once at Arduino boot-up
@@ -1568,7 +1566,7 @@ void printStatus(EthernetClient client) {
 }
 
 
-void addToLog(char type, int data) {
+void addToLog(char type, long data) {
   logKeys[logCursor] = type;
   logData[logCursor] = data;