Go to file
2015-03-27 23:55:03 +00:00
netaddr-0.7.10 Adding network scanning 2015-03-27 22:54:25 +00:00
python-nmap-0.3.4 Adding network scanning 2015-03-27 22:54:25 +00:00
netwatch.py Got basic nmap scanning working 2015-03-27 23:47:40 +00:00
README.md Updating readme 2015-03-27 23:55:03 +00:00

NetWatch.py - Turnkey Network Dashboard

Requirements

  • nmap

Installation

cd python-nmap-0.3.4
sudo python setup.py install
cd ..
cd netaddr-0.7.10
sudo python setup.py install
chmod +x netwatch.py

Running

  • Manually:

    ./netwatch.py

  • Automatically login on a Raspberry Pi:

    sudo nano /etc/inittab

    • Navigate to the following line in inittab

      • 1:2345:respawn:/sbin/getty 115200 tty1
    • Add a # at the beginning of the line to comment it out

      • #1:2345:respawn:/sbin/getty 115200 tty1
    • Add the following line just below the commented line

      1:2345:respawn:/bin/login -f pi tty1 </dev/tty1 >/dev/tty1 2>&1

    • This will run the login program with pi user and without any authentication

    • Save and Exit.

      • Press Ctrl+X to exit nano editor followed by Y to save the file and then press Enter to confirm the filename.
    • Reboot the pi and it will boot straight on to the shell prompt pi@raspberrypi without prompting you to enter username or password.

  • Run automatically after login:

    echo '~/netwatch.py/netwatch.py' > ~/.bash_profile